User's Manual

* Press OK/Save/Enter button (menu displayed on the left of the

screen) to go to next step. Press Previous Button to go back to the

previous step of the screen.

* Press Navigator Button (up/down/left/right) to move the cursor to the

direction as designated.

Writer of number

It is used to input password 1, password 2 and call-restricted password.

Press the following buttons to make use of its functions specified.

* Use the buttons 0 to 9 to press such number 0 to 9 as applicable.

* <*> button has no function.

* # button is used to display the decimal point, excepting in the screen

of password 1 and 2.

* Press CLR button to delete the last number input. Keep on pressing

CLR button to delete the whole number input.

* Press OK button to go to next screen. Press Previous Button (Atras)

to go back to the previous screen.

* Press the direction button left or right to make the cursor move to the

direction as indicated.

Writer of text

It is used to input text of names or messages. There are 4 input methods for

text writer.

* Capital letter input: displays all the input text in capital letters. This

can be used together with Multi Input and Smart Input which will be

later described.

* Small letter input: displays all the input text in small letters. This can

be used together with Multi Input and Smart Input.

* Capital & Small letter input: In case with Multi Input accompanied,

this will change the text if once input by user, to small letters