User's Manual

ROM of the phone if reserving PLMN information will display its name.
Or national codes for communication network will be displayed.
After such a communication network is selected, the phone will try to
enter the communication network. The cell phone if registered
completely will be in stand-by state. If not, the cell phone will display a
list for you to search for other communication network.
Preferred
It helps you to define PLMN list in preferred sequence.
Select Preferred on Network screen and press OK (See < Setting
communication network environment> for the route to this option>).
Preferred is as shown below;
PLMN communication network connected will be displayed on this screen in
preferred sequence.
Available option buttons are as follows:
* Insert: allows you to attach communication network code preferred.
Input 5 digits of communication network code and press OK button.
The code just specified will be input in front of the communication
network code specified prior to this process.
* Move: moves a code onto other list. First, select a desired code and
press option button. Then select Move and press OK.
On Table of contents screen, a location desired on the list shall be
specified. Press OK button to finish.
128