User's Manual

8. Set alarming time to inform you that an applicable event will be open.
(Alarming time screen); None, 1 day prior, 30 minutes prior and 15
minutes prior are available, where you can select an exact time
option you want. After a time option is selected, press OK.
You don t need to specify details as in alarm types or birthday event.
9. Finally, specify the type of alarm to inform you that an applicable
event will be open. There are 2 types of alarm available.
A. Visual: uses blinking light to operate the alarm.
B. Ring visual: uses sound and light to operate the alarm.
Select a desired alarm type and press OK to finish all the procedures.
Note: The sound of the time alarm is different from that of the event alarm.
When a call is received while an alarm operates, the alarm will stop till the
call is finished. In the beginning the alarming bell will go on for 1 minute, and
then for 5 minutes if not stopped by user. After the third bell, the alarm will
stop then.
The following icons will be displayed on the icon bar of the upper screen
when you specify the alarm. The screen of event alarm is as shown
below;
109