User's Manual

- 62 -
While another call is being connected, the following options are available.
Following «2 », press «Call» ( ).
Receive- answers the call coming in.
Reject - rejects the call coming in. If this option is selected, a new call
will be rejected.
Multiple call - makes all the stand-by calls get into a multiple call. Press
«3» and then «Call» ( ) to let all calls get into the multiple call.
End a call- ends a call among calls being performed. If this option is
selected, the list of the calls being performed will be displayed, and the
call will be finished as selected.
End a stand - by call - ends a stand-by call.
End all calls - ends all the calls being performed or standing by.
Display sender
If this option is used, user’ s number information will not be delivered to the
following receivers of the call. Availability of this function depends on the
provided service.
Display number sent
The communication network always displays the phone number sent except
for restriction or cancellation of call information for the call sender.
Select communication network
The user can select a communication network manually or automatically when
turning the mobile phone on.
If manual selection is specified, select «Final communication network connected»,
«Present communication network» while the mobile phone is turned on.
1. Press Menu button on the basic screen and move to Service. And
press Select button.
2. Go to Information option item and press Select button.
3. Select Send No ID option and press Select button.
4. Select an applicable option and press Select button.