User's Manual

The range standard is to search for safety of all regardless of age or health

state.

Standard value exposed of the mobile phone is displayed in “Specific

Absorption Rate” (SAR) unit.

The SAR range (limit) that EU council recommends is 2.0w/kg.

Based on the mobile functions, SAR test will be performed, and then the

mobile sends the maximum output at the certified frequency. Its maximum

output will be measured in SAR, but the level of the usual SAR will be far less

than the maximum value. It is because the mobile phone is designed to

operate at various strength of frequency. Consequently you are required to

use the phone with the minimum strength as necessary in the communication

network. In general, the closer a transmitting tower is, the lower the strength is.

The manufacturer shall demonstrate that the phone conforms to R&TTE

standard of Europe prior to release in the communication market. All of these

requirements are mandatory to keep all the users safe and healthy. The

maximum output of SAR in the phone is tested to be 1,15W/Kg.

SAR limit for all the used mobile phones is 2.0 W/Kg for 10g of the human

body, which is the maximum value in consideration of the additional safety

items so to include all the other variables. SAR’s standard value can be

changed to cope with national requirements and functions of the communication

service network.

Communication network service

The product is approved to be available in GSM850~1900 environment. Please

read the user manual carefully to get familiar with the functions of the device.

Besides, this mobile phone is allowed to accept other communication network

services. However, you need to contact the operator to use the services. How

to join will be described later.

Safety on the road

Please remember that use of the mobile phone is prohibited during driving.