User's Manual

5050

Call settings

You can change the call setting in this menu such as Any key Answer, Auto

Redial and Minute Minder.

Call waiting

This service is used to make other call stand by while a precedent call is

connected, which can be applied or cancelled as necessary. In order to apply

this function, select Stand-by call option on call service menu (see the first of

the manual if you are not familiar with the route to this screen) and press

Select to display the following options;

* Activate: applies Call Waiting call option.

* Cancel: cancels Call Waiting call option.

* Status: displays the state of Call Waiting call.

Select state option and press Select apply.

Call Forwarding

It allows you to make received Call to go to other phone number. Select this

option and press Select button to use this function, which has 4 sub-menus as

follows

▪ All calls: cancels all the previous options if all the type of calls

received is specified.

▪ Busy: receives all calls selected even during you are connected with

other phone.

▪ No answer: The service provider shall specify the number of bells to

make In-absence mode active if call is not answered.

▪ Unreachable: receives all calls sent even if out of service area

1. Press Menu button on the basic screen and move to Settings menu.

And press Select button.

2. Move to Call settings menu Select button.

3. Go to Call waiting menu and press Option button.

4. Select the desired option and press OK button.