User's Manual

(2) Once you have established the connection, dial the second caller’s phone number and
press ‘SEND’.
(3) When you are connected to the second caller, press ‘SEND’ once more to begin your
three-way call.
Answering a call
When somebody calls you, the phone rings/or vibrates and the phone animation in the middle
of the screen flashes.o If the caller can be identified, the caller’s phone number (or name if
stored in your Contacts) is displayed. If the caller cannot be identified, only the phone
animation flashes.
1. If open the slider, answer the incoming call.
During a call, if you want to adjust the earpiece volume, use the volume keys on the
left side of the phone.
Press the key to increase and the key to decrease the volume.
2. End the call by closing the slider or pressing the ‘END’ key.
Note: You can answer a call while using the Contacts or menu features.
When the phone rings/or vibrates as someone call, you can make the ring/or
vibration silence by pressing the ‘END’ key.
Adjusting Volume
During a call, if you want to adjust the earpiece volume, use the volume keys on the left side of
the phone
Press the ‘up’ key to increase and the ‘down’ key to decrease the volume
In the idle mode with the slider open, you can adjust the key volume using these keys.
Viewing Missed Calls
When you are unable to answer a call for any reason, you can find out who called you, provided
that this service is available. In this way, you can call the person back, if necessary. The
number of missed calls is displayed on the idle screen immediately after the call was missed.
To view the missed call immediately, proceed as follows.
(1) If the phone is closed, open the slider .
(2) Press the ‘SEND’ key.
The number corresponding to the most recent missed call is displayed.
(3) To scroll through the missed calls, Press the ‘up’ or ‘down’ key
-11-