User's Manual

Getting Started
Turning On/Off the Phone
1. Press & hold the ‘END’ key until the phone switches on.
2. If necessary, enter your 4-digit unlock code and press ‘OK’ key to unlock the phone
Note: The display language is preset to Spanish at the factory. To change the language, use
the ‘Settings’ menu option in the ‘Other Function’ menu
4. When you wish to turn off the phone, Press & hold the ‘END’ key until the power-off
animation is started
Making a call
When the idle screen is displayed(the slider of phone is open), enter the area code and phone
number and press the ‘SEND’ key. When you have finished your call, close the slider or briefly
press the ‘END’ key.
Making a call using the Contacts
You can store phone numbers that you use regularly in the phone’s memory, called Contacts.
Once you have stored phone numbers in Contacts, you can dial them simply by selecting the
name or phone number you want to call.
Making a call using the speed dialing number
Memory locations 0 through 799 are special one-touch locations. You can dial the phone
numbers stored in the Contacts memory from 0 through 799 simply by pressing one button.
Making a call using the call records
The call records stores the last 60 numbers dialed. To recall any of these numbers, proceed as
follows.
(1) If there are any characters on the display, clear the display by holding down the ‘CLR’
key for more than one second.
(2) Press ‘SEND’ key. The list of the calls is displayed.
(3) Use the ‘UP’, ‘DOWN’ key of Navigation keys to scroll through the numbers until you
select the required number.
(4) Press ‘SEND’ key to dial the number displayed.
[note] Three Way Call
(1) Enter a number you wish to call and press ‘SEND’.
-10-