User's Manual

Installing the Battery
To install the battery, insert the bottom of the battery into the opening on the back of the phone.
Then push the battery down until the latch clicks.
Removing the Battery
Turn the power off. Lift the release latch to detach the battery
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen.
When the battery charge level becomes low, the low battery sensor alerts you in three ways:
sounding an audible tone, blinking the battery icon, and displaying LOW BATTERY
WARNING! If the battery charge level becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
Battery Information and Care
1. Never use an unapproved battery since this could damage the phone and / or battery and
could cause the battery to explode.
2. The battery does not need to be fully discharged before recharging.
3. Use only VITELCOM approved chargers specific to your phone model since they are
designed to maximize battery life.
4. Do not disassemble or short-circuit the battery.
5. Keep the battery’s metal contacts clean.
6. Replace the battery when it no longer provides acceptable performance. The battery can be
recharged several hundred times before replacement.
7. Recharge the battery after long periods of nonuse to maximize battery life.
8. Do not expose the battery charger to direct sunlight or use it in areas of high humidity such as
a bathroom.
9. Battery life will decrease if exposed to extreme hot or cold temperatures.
10. Battery life will vary due to usage patterns and environmental conditions.
11. The use of extended backlighting, MiniBrowser, and data connectivity kits affect battery life
and talk/standby times.