User's Guide

Aspen Reference Guide
Chapter 7 Keypad Service Provisioning
To lock/unlock the active NAM
The phone will reboot when quit the ‘System’ menu if you have changed the
prefeered or the active NAM.
Test Screen
This menu will display some system parameters such as Rx Power, Tx Power, Pilot Pn,
EC/IO, etc. While the test screen is active, you can dial a number and end a call through
the keypad. When in a call, the test screen will be taken to the front to show the
parameters.
Factory test mode
This is also a hidden menu, and you can enter it by pressing “#*0203”.
Note: You can quit ‘Keypad’ test by press right soft key twice.
7-4