User's Manual

Tornado Customer Reference Guide
TM0410-1800, Rev 2A
January 2006
VIA Telecom, Inc. Proprietary 7-1
Chapter 7 Keypad Service Provisioning
This is a hidden menu. You can enter it by pressing ‘#*0204’.
This feature is protected by SPC1. The default is “111111”.
Program NAM1, NAM2, or SPCs
Select the menu “Service Program” and press “Select” key.
After inputting the SPC2, NAM1 or NAM2 can be programmed. The default is “222222”.
To program NAM 1
Select NAM 1
There will be many parameters to be input one by one. The next will bring up when you press “Ok”,
and the value you input will be stored. You can back to the previous parameters by pressing “Back”
key.
The MIN Lock is set to “Enable” as default. When you input a new MIN, it must meet the criteria
stored in the MIN Lock table. Otherwise the phone will prompt “Invalid MIN!”.