User's Manual

Tornado Customer Reference Guide
TM0410-1800, Rev 2A
January 2006
Chapter 3 – Messages
3-14 Via Telecom, Inc. Proprietary
Enable/disable auto save outgoing message
1. Auto Save →
→ →
→ Auto Save or Do Not Save to enable/disable auto save outgoing message.
Set Call Back Number
If you enable Callback number, every message you sent will postfix the number you set here and the
receiver will know which number to call back when reading the message.
2. Callback →
→ →
→ Edit →
→ →
→ enter callback number →
→ →
→ Ok →
→ →
→ On/Off to enable or disable callback
number.
Msg Settings
Select Back
2. Auto Delete
1. Auto Save
3. Callback
Call Back
Select Back
2. Off
1. ON
3. Edit
Callback #
OK Erase
20
Set Send Time
If you set Send Time , message will be deferred and sent according to the time you set here, but this
function needs service provider support.
1. Send Time →
→→
→ ▲ ▼ →
→ →
→ Select deferred time.
Msg Settings
Select Back
3. Callback
2. Auto Delete
4. Send Time
Names
Select Back
4. Erase All
3. Search
5. Speed Dial
Set Validity Time
If you set Validity time, the message will be kept in Short Message Center until the time you set here is
expired. Note: This function needs service provider support.
1. Validity →
→→
→ ▲ ▼ →
→ →
→ Select the validity time
Validity
Select Back
O 30 minutes
O Default
O 1 hour