VTM-LCD220P 22” Wide Screen Professional LCD Monitor VITEK • 22” Wide Screen LCD Display Panel • VGA, Dual Looping BNC Composite, and HDMI Video Inputs & Stereo Audio Input • Resolution up to 1680 x 1050 • Contrast Ratio of 1000:1 • Front Panel Controls • Picture In Picture (PIP), Picture By Picture (PBP) or POP (Picture On Picture) Display.
VTM-LCD220P 1 Introduction and Package Contents Introduction Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring easy to use OSD controls and built in speakers, you will find this monitor both easy to use and a pleasure to look at.
VTM-LCD220P Specifications Panel Type 22" TFT Color LCD Optimum Resolution 1680 x 1050 Display Colors 16.7 Million Colors Pixel Pitch 0.282 (H) x 0.282 (V) mm Contrast Ratio 1000:1 Brightness Viewing Angle 300 cd/m2 H: 170 degrees V: 160 degrees Response Time 5 ms Scanning Frequency H: 31~65kHz V: 56~75Hz Video Inputs Dual Looping BNC Composite Digital Inputs 15 pin D-Sub (Analog RGB) / HDMI Video Input 2 x BNC (Looping) Audio Inputs Stereo RCA Internal Speakers 2.
VTM-LCD220P Timing Item Resolution H Freq.(KHz) V Freq.(MHz) 1 640x400@70Hz 31.46 2 640x480@60Hz 31.5 25.175 3 640x480@72Hz 37.9 31.500 4 640x480@75Hz 37.5 31.500 5 720x400@70Hz 31.46 6 800x600@56Hz 7 800x600@60Hz 37.9 40.000 8 800x600@72Hz 48.1 50.000 9 800x600@75Hz 46.9 49.500 10 1024x768@60Hz 48.4 65.000 11 1024x768@70Hz 56.5 75.000 12 1024x768@75Hz 60.0 78.750 13 1280x1024@60Hz 64.0 108.000 14 1280x1024@75Hz 80.0 135.
VTM-LCD220P 2 Monitor and OSD Control Monitor and OSD Control The LCD color monitor has a simple control layout for controlling the monitor and OSD (On Screen Display) functions. The table below summarizes the control keys and their related functions. Keys POWER SOU/AOU ▲ ▼ + MENU Function Description Toggle the display between standby mode and on/off. (Press “Power” and waiting 6 sec., monitor will be display ) Switch Mode “PC”, “AV1”, “AV2”, “HDMI”.
VTM-LCD220P 3 OSD Control Function List OSD Menu Picture Mode 1. Picture Mode Press “▲” OR “▼” to select the picture mode “Standard, Movie, Vivid, Sport, Game“ 2. Brightness This is used to set the brightness of the screen. 3. Contrast 4. Hue 5. Saturation 6. Sharpness 7. Color Temp. 8. DNR Press “▲” OR “▼” to adjust the parameter. This is used to adjust the image contrast. Press “▲” OR “▼” to adjust the parameter. This is used to adjust the image hue. Press “▲” OR “▼” to adjust the parameter.
VTM-LCD220P Sound Mode 1.Sound Mode Press “Select” to select “ Volume ” mode. 2. Volume Press “▲” OR “▼” to adjust volume level. 3. Mute Press “▲” OR “▼” to select sound “Off,On”. OSD Setup Mode 1. Setup Mode 2. Language 3. H. Position Press “Select” to select “Language, H. Position, V. Position, H. Zoom, V. Zoom, Recall” mode. Press “▲” OR “▼” to select language. Move the display picture left or right. Press “▲” OR “▼” to adjust the parameter. 4. V Position Move the display picture up or down.
VTM-LCD220P PIP/POP Setup Mode 1. PIP/POP 2. Multi Window 3. SubSource 4. Size Press “Select” to select “PIP” mode. Press “▲” OR “▼” to select “PIP, POP Full, POP 4:3,Off” mode. Press “▲” OR “▼”to select “AV, COMPUTER, HDMI” mode. Adjust the size of Sub Source window. Press “▲” OR “▼”to select “Large, Middle, Small” 5. Position Move the position of Sub Source window. 6. Border Color 7. Sound Source 8. Swap 4 Press “▲” OR “▼” to select “1, 2, 3, 4” position.
VTM-LCD220P 6. Keep the LCD monitor away from sharp object to touch the screen like fingernail and pencil. WARNING: Any unauthorized modification to this equipment could result in the revocation of the authorization to operate the equipment and void the product warranty. 5 Frequently Asked Questions Power button does not respond • Check the power cord to ensure that it is securely plugged into the monitor base and also into the electrical outlet.
VTM-LCD220P 6 Regulations and Maintenance FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VTM-LCD220P Disconnect the power plug from the AC outlet under following conditions: ◎ If you will not use it for an indefinite period time. ◎ When the power cord or plug is damaged or frayed. ◎ If the product does not operate normally when the operation instructions are followed. Adjust only those controls that are covered by the operating instructions.
28492 Constellation Road Valencia, ca 91355 WWW.VITEKCCTV.
