User`s guide

VTM-LCD174P / VTM-LCD194P
5
OSD Control Function List
Picture Mode
1. Picture Mode Press “-” OR “+” to select the picture mode
“ Memory , Standard , Mid , Dynamic”
2. Contrast This is used to adjust the image contrast.
Press “-” OR “+” to adjust the parameter.
3. Brightness This is used to set the brightness of the screen.
Press “-” OR “+” to adjust the parameter.
4. Color Set favorite color of red , green, and blue.
Press “-” OR “+” to adjust the parameter.
5. Tint The screen deflection red of green.
Press “-” OR “+” to adjust the parameter.
6. Sharpness Adjust the sharpness. It makes the image become soft.
Press “-” OR “+” to adjust the parameter.
7. Color Temp. Press “-” OR “+” to adjust the color tones.
“ Cool , Warm , Normal “
8. DNR Press “-” OR “+” to adjust the noise reduction.
“High , Medium , Low , Off “
NOTE: No. 5 ~ No.8 only in video mode.
Sound Mode
1. Sound Mode Press “Select” to select “ Volume ” mode.
2. Volume Press “-” OR “+” to adjust volume level.