User`s guide

VTM-LCD174P / VTM-LCD194P
10
◎ If the product has been dropped or the cabinet has been damaged.
◎ If the product exhibits a distinct change in performance, indicate a need for service.
＊Power and extension cords
- Do not allow anything to rest on the power cord.
- Do not locate this product where persons will walk on her cord.
- Use the proper power cord with correct attachment plug type. If the power source is 120
V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240 V
AC supply, use the tandem (T blade) type attachment plug with ground conductor power
cord that meets the respective European country’s safety regulations, such as VDE for
Germany.
- Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 10 amperes.
- Ensure that the total ampere rating of all units plugged into the extension cord is not
over the cord’s rating.
- If the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TUV approved
computers with receptacle rated 100~240V AC, 50/60Hz, 2.0A(minimum).
＊Environment
- Place the monitor on a flat and leveled surface.
- Place the monitor in a well-ventilated place.
- Keep the monitor away from: Extremely hot, cold or humid places, places directly under sunlight,
dusty surroundings, & equipment that generates strong magnetic fields.