VTM-LCD174P VTM-LCD194P 17” & 19” Professional LCD Monitors VITEK • 17" or 19” LCD Display Panel • VGA, Dual Looping BNC Composite, and HDMI Video Inputs • Resolution up to 1280 X 1024 • Contrast Ratio of 800:1 • Front Panel Controls • OSD Menu Programming • VESA Standard Mounting 100 CYAN MAGENTA YELLOW BLACK
VTM-LCD174P / VTM-LCD194P Introduction Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring easy to use OSD controls and built in speakers, you will find this monitor both easy to use and a pleasure to look at.
VTM-LCD174P / VTM-LCD194P Specifications Panel Type VTM-LCD174P VTM-LCD194P 17" TFT Color LCD 19" TFT Color LCD 16.2 Million Colors Display Colors 0.264 mm Pixel Pitch Recommended Resolution SXGA (1280 x 1024) Contrast Ratio 800:1 350 cd/m2 Brightness Viewing Angle H: 160 degrees V: 135 degrees Response Time 5ms Scanning Frequency H: 31~65kHz V: 56~75Hz Video Inputs/Outputs Dual Looping BNC Composite 15 pin D-Sub (Analog RGB) / HDMI PC Inputs Stereo RCA In / 3.
VTM-LCD174P / VTM-LCD194P Timing Resolution H Freq.(kHz) 1 640x400@70 31.46 2 640x480@60 31.5 59.940 VESA 3 640x480@72 37.9 72.809 VESA 4 640x480@75 37.5 75.000 VESA 5 720x400@70 31.46 6 800x600@60 37.9 60.188 VESA 7 800x600@72 48.1 72.000 VESA 8 800x600@75 46.9 75.087 VESA 9 1024x768@60 48.4 60.004 VESA 10 1024x768@70 56.5 70.069 VESA 11 1024x768@75 60.0 75.029 VESA 12 1280x1024@60 64.0 60.000 VESA 13 1280x1024@75 80.0 75.
VTM-LCD174P / VTM-LCD194P Monitor and OSD Control The LCD color monitor has a simple control layout for controlling the monitor and OSD (On Screen Display) functions. The table below summarizes the control keys and their related functions. Keys Function Description Power Auto + Select Menu Pressing this key turns he display system power ON/OFF. Automatically adjusts H-Position, V-Position, Pixel Clock and Phase for an optimal image in PC mode onl y. Switch setting item.
VTM-LCD174P / VTM-LCD194P OSD Control Function List Picture Mode 1. Picture Mode Press “-” OR “+” to select the picture mode “ Memory , Standard , Mid , Dynamic” 2. Contrast This is used to adjust the image contrast. Press “-” OR “+” to adjust the parameter. 3. Brightness This is used to set the brightness of the screen. Press “-” OR “+” to adjust the parameter. 4. Color Set favorite color of red , green, and blue. Press “-” OR “+” to adjust the parameter. 5. Tint The screen deflection red of green.
VTM-LCD174P / VTM-LCD194P Setup Mode 1. Setup Mode 2. Language 3. Source Press “Select” to select “Language, Source” mode. Press “-” OR “+” to select language. Press “-” OR “+” to select “PC, AV1, AV2, HDMI” Signal Source. Video Settings 1. Video Setting 2. H. Position 3. H. Zoom 4. V. Position 5. V. Zoom 6. Recall Press “-” OR “+” to select “H. Position, H. Zoom, V. Position, V. Zoom, Recall” mode. Moves the display picture left or right. Press “ - ” OR “ + ” to adjust the parameter.
VTM-LCD174P / VTM-LCD194P Caring for your LCD Monitor The LCD color monitor is a sensitive piece of electronic equipment. Proper care can prevent accidentally damaging the LCD panel or the monitor itself. By following these guidelines you can ensure many years of trouble free use. 1. The LCD monitor's plastic casing and LCD glass panel can be cleaned with a soft, lint-free cloth. Never use scrub pads or other cleaning materials with abrasive surfaces to clean your LCD monitor! a.
VTM-LCD174P / VTM-LCD194P F.A.Q. Power button does not respond • • • Check the power cord to ensure that it is securely plugged into the monitor base and also into the electrical outlet. Ensure there is electrical power coming from the AC outlet. Use another device to check for power. Unplug the power cord of the monitor from the AC outlet; wait a few minutes, then to plug the power cord into the AC outlet again. This will reset the monitor and power supply.
VTM-LCD174P / VTM-LCD194P interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VTM-LCD174P / VTM-LCD194P ◎ If the product has been dropped or the cabinet has been damaged. ◎ If the product exhibits a distinct change in performance, indicate a need for service. ＊Power and extension cords - Do not allow anything to rest on the power cord. - Do not locate this product where persons will walk on her cord. - Use the proper power cord with correct attachment plug type. If the power source is 120 V AC, use a power cord that has UL and C-UL approvals.
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
