Instruction manual

5.2 Setup of ZOOM and FOCUS

• Adjust zoom and focus in order.

1) Open ⓓFront cover for adjustment.

2) Place the separated ⓓFront cover on the safe place from water & dust.

3) Turn ⓞZoom knob counter clockwise a little to unlock the knob.

4) Move ⓞZoom knob to fit the zoom. (Wide Tele)

5) Turn ⓞZoom knob clockwise a little to lock the knob.

6) Using thumb and index finger, turn ⓝFocus ring to fit the focus. (Far Near)

7) Close and tighten ⓓFront cover. (See CAUTION below)

3) & 5)

4) & 6)

* IMPORTANT TIP for good focus adjustment

Step 1. Turn Iris Level adjustment VR clockwise to max position.

Step 2. Set ELC switch to ON at DIP switches.

Step 3. Adjust zoom knob and focus ring of lens.

Step 4. Set ELC switch to OFF at DIP switches.

Step 5. Adjust Iris Level VR to get the proper video level.

ⓝ Focus Ring

ⓞ Zoom Knob

CAUTION

When assembling ⓓ

Front cover, be sure

that ⓙRubber sealing is not protrusive.

If ⓓ

Front cover is tightened excessively,

sealing may not be ensured.

ⓓFront cover