User`s manual

14
Video1 Video2, S-Video Mode Menu Field Definitions
Source: Select VIDEO1, VIDEO 2, S-VIDEO.
Contrast: Adjusts black level of the video screen image (0 to 100).
Brightness: Adjusts white level of the video screen image (0 to 100).
Sharpness: Adjust the picture softer or sharper (0 to 15).
Color: Adjusts the color saturation of the video signal (0 to 100).
Tint: Adjusts the range of color: green to red (0 to 100).
3D NR: Reduces the background noise of the video signal (NR ON or OFF).
Disabled when VGA and DVI input is selected.
Language: Select English, German, French, Spanish or Italian for the OSD display.
Key Lock: Select UNLOCK or LOCK. Locks/unlocks the buttons on the front panel.
Screen Size: Select Under, 16:9, Over or 4:3.
OSD Setting: Select SETUP for the on-screen display. Then select one of the following:
H.Position: Adjusts the OSD horizontal position (0 to 100).
V.Position: Adjusts the OSD vertical position (0 to 100).
Display Time: Selects off, 5 to 30 secs.
Color Temperature: Select NORMAL, COOL, or USER.
If you select USER, then select from the following calibrations:
R-Gain: Adjusts gain for red (0 to 100).
G-Gain: Adjusts gain for green (0 to 100).
B-Gain: Adjusts gain for blue (0 to 100).
R-Offset: Adjusts the offset (or cut) for red (0 to100).
G-Offset: Adju
sts
sts the offset (or cut) for green (0 to 100).
B-Offset: Adjusts the offset (or cut) for blue (0 to 100).
Reset: Select Restore to return to the original color temperature settings.
Reset: Select Restore to return to the default settings.