VTM-LCD194M 19” Metal Encased Professional LCD Monitor VITEK • 19" LCD Display Panel • Heavy-Duty Metal Case • Dual Looping BNC Composite & 1 VGA Video Inputs • Dual Looping Audio Inputs • Front Panel Controls • Internal Speakers • VESA 100mm Standard Mounting BLACK
1. Use at the rated power voltage. Use of non-rated voltage may cause fire, electric shock and breakdown. 2. Do not open the cabinet and external cover. The high voltage inside of this product may cause the electric shock. 3. Do not remodel or disassemble this product. Remodeling or disassembling in wrong method may cause fire, electric shock or breakdown. 4. Do not insert or drop any foreign substance such as metals or flammable object inside from the air hole.
18. Do not install it at the place with poisonous gas. It may cause the fire. 19. Do not install it at the location with continuous vibration. It may be tipped over as it loses balance or damaged as it is fallen down. 20. Do not install it at the place on the strong magnetic field or current field. It may cause fire, electric shock or break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment. 21.
Explanation of Safety Related Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Q'ty Description 1 1 1 1 1 2 19-inch TFT LCD monitor with attached stand (removable) Power cord VGA cable with 15-pin D-sub connection Installation/ Operation manual Remote Control unit AAA Batteries 6
WALL MOUNT 1. Remove the stand after loosing screws fixing the stand. 2. Wall-mounted bracket at the screw holes (4 places) located in the middle part of the rear LCD MONITOR, with screws. Do not use longer screw than 12mm length except mount parts when you use vesa mount bracket.
1. DC OUT: To output DC power from monitor(12V, Max. 0.5A) 2. Audio(loop through): Mono RCA audio inputs. 3. S-Video(loop through): Connection of S-Video signals from external sources. Video loops through the four-pin DIN S-Video output. 4. Video(loop through): Input connections from Digital Video record or time-lapse VCRs. 5. VGA: Connection to VGA output of a computer or any device with VGA output.
1. MENU: Displays the main on-screen menu. 2. SOURCE: Selects the input source and confirms your choice. 3. and 4. Vol : Navigates through the on-screen menu. and : Increases or decreases the volume. Also selects or adjusts items on the on-screen menu. 5. Power: Turns on/off the monitor. 6. Power indicator: Indicates power status. Red means the power is off, green means the power is on. 7. Remote control signal receiver: Receives remote control signal.
1. Open and remove the battery cover on the back of the remote control. 2. Install two AAA size batteries (supplied). Match the positive (+) and negative (-) signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Make sure the lock snaps closed. WARNINGS: Dispose of batteries in a designated disposal area. Do not throw batteries into a fire. Do not mix battery types.
1. POWER: Turn the monitor on or off . 2. MUTE: Temporarily silence the sound. To return the sound: press MUTE again, VOL +, or VOL -. 3. VIDEO1: Select VIDEO1 as the Source. 4. VIDEO2: Select VIDEO2 as the Source. 5. S-VIDEO: Select S-VIDEO as the Source. 6. VGA: Select VGA as the Source. 7. DVI: Not used 8. MENU/EXIT: 9. /VOL- , Displays/exits the on-screen menu. / VOL+ , and : Controls the cursor in the on-screen menu, and also adjust the volume up or down. 10.
Input Source Display Input source name is displayed on the upper left-hand corner in case of changing input source, or pressing ENTER key on the remote controller. To use the menus: 1. Press the MENU button to access the Main menu. 2. Use the and arrow buttons to highlight a selection. 3. Press the Enter (or 4. Use the / VOL- and / VOL+) button to select an item. /VOL+ arrow buttons to adjust the setting on a selected item.
BLACK
Video1 Video2, S-Video Mode Menu Field Definitions Source: Select VIDEO1, VIDEO 2, S-VIDEO. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). Sharpness: Adjust the picture softer or sharper (0 to 15). Color: Adjusts the color saturation of the video signal (0 to 100). Tint: Adjusts the range of color: green to red (0 to 100). 3D NR: Reduces the background noise of the video signal (NR ON or OFF).
BLACK
VGA Mode Menu Field Definitions NOTE: It consists of the following options: Source, Contrast, Brightness, H-Position, V-Position, Frequency, Phase, Language, Key Lock, Screen Size, OSD Setting, Color Temp. Reset Source: Select VGA. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). H-Position: Adjusts the horizontal position (0 to 100). V-Position: Adjusts the vertical position (0 to 100).
If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No userserviceable parts are inside. Refer servicing to qualified personnel. CLEANING Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free cloth. Gently apply pressure to the screen surface to clean the display.
Specifications Panel Type Display Colors Pixel Pitch Resolution Contrast Ratio Brightness Viewing Angle Response Time Scanning Frequency Video Inputs/Outputs PC Inputs Audio Inputs Screen Control LCD Lamp Weight Power Supply Dimensions (w/o Stand) 19" TFT Color LCD 16.2 Million Colors 0.
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
