Specifications

BLACK
20
PRIVACY Default Descriptions
AREA SEL 1/8
Selects one of AREA1~AREA8 to be adjusted.
TOP(BOTTOM) - button moves up and button moves down the top
(bottom) border of the selected window at AREA SEL.
LEFT(RIGHT) - button moves left and button moves right the left
(right) border of the selected window at AREA SEL
COLOR 1 Sets one of 8 colors for the selected mask window at AREA SEL.
TRANSP 1.00
Transparency rate for the mask can be adjusted.
0.00 - Mask is fully transparent and not visible.
0.50 - Mask is 50% transparent.
0.75 - Mask is 25% transparent.
1.00 - Mask is not transparent.
MOSAIC OFF
Enables or disables the mosaic effect for the selected mask window at
AREA SEL
17 LANGUAGE menu
Seven languages, ENGLISH ,JAPANESE, DEUTCH, FRANCAIS, RUSSIAN, PORTUGUES and
ESPANOL, are available with this camera.
18 CAMERA ID menu
Up to 40 characters can be input for camera ID.
To enter CAMERA ID menu, press button at MAIN menu-2>CAMERA ID.
Use , , , buttons to move a block cursor in character table and press button to input the
selected character.
To move the character input position on CAMERA ID input line, move a cursor to ←→ on COMMAND
LINE and press button on ← or →.
To clear CAMERA ID input line, move a cursor to CLR on COMMAND LINE and press button.
To set the location of CAM TITLE to be displayed on the monitor, move a cursor to POS and press
button. Then, the menu will disappear and the CAMERA ID will be displayed on the monitor.
Move CAMERA ID by using , , , buttons and press button to fix.
Menu will appear again.
To finish CAM TITLE menu, press button on RET on command line.
COMMAND LINE
CAMERA ID input line
OSD Menu Features/Setup