VTM-143C 14” Color CRT Monitor VITEK • 450 TV Lines At Center on a 14" Diagonal Screen • Attractive Black Metal Cabinet • Digital Front Panel Controls For: Tint, Color, Brightness, Contrast • Front Panel Video Source Buttons for: Video1 / Video2 / S-Video • 2 Looping Video Inputs & Dual Audio In / Out • Rack Kit Available: VI-141CRM CYAN MAGENTA YELLOW BLACK
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER, NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INSTRUCTIONS 11) Power Sources This product should be operated only from the type of power resource indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. 12) Grounding or Polarization This product is equipped with a three-wire grounding-type plug a plug having a third (grounding) pin.
FRONT CONTROLS / REAR INPUTS/OUTPUTS 4
CONTROLS & A/V INPUT/OUTPUT FUNCTIONS FRONT PANEL CONTROLS: VIDEO 1 Button Set the switch to VIDEO 1 is set when camera jack is used. VIDEO 2 Button Set the switch to VIDEO 2 is set when camera jack is used. S-VIDEO Button Set the switch to S-VHS if the S-VIDEO jack is used. UNDER SCAN Press the button, select the desired display size for OVER SCAN and UNDER SCAN. POWER Button Press to turn the monitor ON. The POWER LAMP above the switch will illuminate. POWER LED LAMP Power lamp indicates the power is on.
OSD MENU ADJUSTMENTS Access the OSD Menu: Press the MENU button and use the arrow up/down buttons and arrow left/right to navigate the menu system. To exit the OSD menus, press MENU repeatedly until the menu closes. Contrast adjustment: Adjust the CONTRAST control for the desired overall display contrast. Proper adjustment will allow maximum gradations between the darkest and lightest picture areas. Brightness adjustment: Adjust the BRIGHTNESS control for the desired overall display brightness.
CONNECTING THE MONITOR Video camera Audio Audio signal cable Video Video signal cable VCR Audio Video Video Monitor Video camera Audio Audio signal cable Video Video signal cable VCR Audio Video Video Monitor Video camera Audio Audio signal cable VCR Audio Y/C (S-VHS) S-VHS Signal cable 7 CYAN MAGENTA YELLOW BLACK
NOTES 8
NOTES 8 CYAN MAGENTA YELLOW BLACK
SPECIFICATIONS DETAILED SPECIFICATIONS 10 Picture Tube 14" diagonal with 90° deflection angle Resolution 450 TV Lines Video System NTSC / PAL A/V Terminals Looping BNC Video In/Out, S-Video Input, Audio In/Out Input Signal Video Composite: 1Vp-p Sound output 1.0 W Speaker 3W Power Source AC 100-240V~, 50/60 Hz Power Consumption 45 Watts Operating Temperature 32°-106° F (0°-40° C) Dimensions(W x H x D) 13.8" x 12.9" 14.6" (350 x 328 x 371 mm) Weight 30.
WARRANTY INFORMATION LIMITED LIABILITY WARRANTY VITEK monitors carry a two (2) year limited warranty FOB VITEK warehouse, except for LCD Panels which carry a one (1) year warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of two (2) years, or as otherwise stated above, from the date of purchase.
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
