Specifications

VB43ATF
The VB43ATF is a unique transmission device which
provides an economical means of sending video, camera
power and 2 wire control signals over a standard
Category 5 cable.
VB31PT
Video balun transceiver with pigtail coax and male BNC
for twisted pair operation with other balun transceiver or
active receivers. The VB31PT Provides a low cost means
of sending live video over unshielded twisted pair,
point-to-point wiring.
VB37M/F
VB39M/F
Video balun transceiver provide a low cost means of
sending live video over unshielded twisted pair,
point-to-point wiring for up to 750 feet (M model),
(1,000ft. for F model). Two types are available. The basic
VB37 model and the VB39 with built-in surge
suppression for added equipment protection.
TR515
TR560
Live video transmission for operation from 100 to 1,500
feet over twisted pair or Category 5 cables. Both the
TR515 and TR560 are designed for operation over
Category 2 or better twisted pair cable and require the
use of a Nitek transmitter unit. The TR515 and TR560
include the receiver and a power supply for the receiver.
TT560
Designed for operation over Category 2, 3, 4 or 5
twisted pair cable up to 6,000 feet and requires a Nitek
active receiver unit. A highly balanced transmitter output
design assures that the system will not interfere with
other equipment on the network. A dip switch on the
unit provides precise adjustment of gain and frequency
compensation.
MMB1
S-Video and 2 Channel Audio, The MMB1 is designed
to transmit S-Video and audio over a four pair network
cable. Connect the audio to the RCA jacks and the video
to the 4-pin mini DIN connector. Between the units use
a network cable or connect over building structured
cabling. Use T568B wiring.
AS1000
Audio link system that provides a low cost method
of sending line level audio ordinary twisted pair,
point-to-point wiring for distances of up to 2 miles (8.2
kilometers). The AS1000 includes two bi-directional
modules. Audio companion product for the NITEK video
transmission systems.
TS515
A complete twisted pair video system made up of a
TR515 receiver unit and a VB37 balun unit. The system
is designed to operate over Category 2, 3, 4, 5, 6 or 7
twisted pair cable. A highly balanced transmitter output
assures that the system will not interfere with other
network equipment. 24VAC power required. In multiple
receiver and/or transmitter applications a common
supply can be used for the system.
TS560
A complete twisted pair video system made up of a
TR560 receiver unit and a VB37 balun unit. The system
is designed to operate over Category 2, 3, 4, 5, 6 or 7
twisted pair cable. It works well over existing
communication, computer network spare pairs, or new
cable installations. 24VAC
EX1120
A complete twisted pair video system made up of a
TR1120 receiver unit and a TT1120 transmitter unit for
Category 2, 3, 4, 5, 6 or 7 cable. Both the transmitter
and receiver provide adjustment for gain and frequency
compensation. Unique adjustments provide optimum
performance over the entire operating range. 24VAC.
High resolution color or monochrome video.
VH3200
32 port powered video hub with built-in surge
suppression and video detection. Systems operate with
other Nitek UTP video equipment including, video
transceiver hubs, standard video balun transceivers,
active transmitters, or any twisted pair equipped camera.
This modular hub system holds up to four VB41x8,
TR515x8 or TR560x8 8 channel video receiver cards in
any combination.
EX560
A complete twisted pair video system made up of a
TR560 receiver unit and a TT560 transmitter unit system
designed to operate over Category 2 or better twisted
pair cable. Active electronics compensate for frequency
and level loss. Both the transmitter and receiver provide
adjustment for gain and frequency compensation. High
resolution color or monochrome video. 24VAC power.
VB41X8
The VB41x8 modular card is designed for use with the
modular rack system. Each card has 8 video balun units,
built-in surge protection and video loss detection. The
Nitek video baluns are transmission devices that provide
a low cost means of sending live video over unshielded
twisted pair, point-to-point wiring for distances of up to
750 feet.
A twisted pair video transmission system allows you to expand your install
to a new realm of opportunities. With twisted pair you gain the ability to run multiple
cameras over a single cat5 cable. It brings an ease for
installing PTZ’s that was not known before.
An added benefit of a twisted pair video system is the hub style of
instillation, making it possible to not only organize your cable in a central
location it will also allow you the options for a powered hub that will
decrease interference and boost your video signal for long distance runs up to
10,000 feet.
Video Transmission
38
www.2mcctv.com | call:877.801.5511