Quick Start Guide

Installation

Before beginning installation, make sure that the wall or ceiling is

strong enough to withstand 3 times the weight of the camera. The

mounting steps are as follows:

1. Remove the fixed ring

from the gap of the

camera (see Install SD

Card)

2. Drill the screw holes and

the cable hole on the

wall according to the

drill template.

3. Route and connect the

cables.

4. Fix the camera to the

wall with screws as

shown.

5. Install the fixed ring

back onto the camera.

∅5.12”

∅0.18”

3.31”

3.82”