Manual

ManualsBrandsVitek ManualsDome Security Cameras1080p HD-AHD, HD-TVI, HD-CVI, Analog Outdoor Dome Camera, 2.8mm Lens

VITEK

VTC-THB36R2F

VTD-THD16R2F

VTD-THMD2RF

VTC-THT24R2F

Transcendent 2.1 Megapixel Indoor/

Outdoor 4-IN-1 HDA Cameras w/IR LED

Illumination

• 1/2.8” 2.1 Megapixel Progressive Scan CMOS

Sensor

• Advanced Starlight Technology Offers Dramatically

Higher Sensitivity to Light Producing Color Images in

Very Dark & Night Scenes

• 2.1 MegaPixel High Definition Analog (HDA):

HD-TVI , AHD, CVI / 960H: CVBS: Output

• 2.8 or 3.6mm Fixed Lens Options

• Infrared LED’s with up to 120’ IR Range

• True Wide Dynamic Range (WDR)

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• IP66 Weather Resistance & IK10 Impact Rating

• Supports Up The COAX Control

• Over 1500’ HD Video Transmission (Depending on

cable characteristics and integrity)

• Optional Junction Box & Wall Mounts Available

• 12VDC Operation

• 3 Year Warranty

FEATURES

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are

available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

Summary of content (16 pages)

PAGE 1
VITEK VTC-THB36R2F VTD-THD16R2F VTD-THMD2RF VTC-THT24R2F Transcendent 2.1 Megapixel Indoor/ Outdoor 4-IN-1 HDA Cameras w/IR LED Illumination FEATURES • 1/2.8” 2.1 Megapixel Progressive Scan CMOS Sensor • Advanced Starlight Technology Offers Dramatically Higher Sensitivity to Light Producing Color Images in Very Dark & Night Scenes • 2.1 MegaPixel High Definition Analog (HDA): HD-TVI , AHD, CVI / 960H: CVBS: Output • 2.8 or 3.
PAGE 2
Limited Product Warranty Safety Precaution To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source.. VITEK products carry a three (3) year limited warranty.
PAGE 3
Video Connection VTC-THB36R2F Components Camera Screws User Manual Drill Template Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Overview 2 Video Video Output Mode Switch: Select the desired video mode using the dip switches contained within the on-cable Output Mode Switch as follows: 1 3 ON ON 4 1 2 1 ON 2 AHD 1 ON 2 HD-TVI 1 ON 2 CVI 1 2 CVBS Power Connection Connect the power connector to a regulated 12 VDC power adaptor.
PAGE 4
Installation Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 3. Loosen the mount lock to adjust the Pan and Tilt of the camera, then tighten the mount lock to secure the viewing angle adjustments. 1.
PAGE 5
VTC-THT24R2F Components Camera Hex Wrench Manual Mounting Plate Screws Rubber Plug Video Connection Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Overview 3 Video 4 Video Output Mode Switch: Select the desired video mode using the dip switches contained within the on-cable Output Mode Switch as follows: 5 2 ON ON 1 1 2 1 ON 2 AHD 1 ON 2 HD-TVI 1 ON 2 CVI 1 2 CVBS Power Connection Connect the power connector to a regulated 12 VDC power adaptor.
PAGE 6
Installation 4. Tighten the lock screws to secure the viewing angle adjustments. Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template . 2.
PAGE 7
Video Connection VTD-THD16R2F Components Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Camera Screws Manual Hex Wrench Drill Template Overview Video Video Output Mode Switch: 3 Select the desired video mode using the dip switches contained within the on-cable Output Mode Switch as follows: 4 ON ON 5 1 1 2 1 ON 2 AHD 1 ON 2 HD-TVI 1 ON 2 CVI 1 2 CVBS Power Connection 2 Connect the power connector to a regulated 12 VDC power adaptor.
PAGE 8
Installation Before beginning installation, make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 4. Adjust the Three-axis camer bracket to obtain the optimium viewing angle. 1. Attach the drill template to the place where you want to install the camera, then drill the screw holes and 1 cable hole according to the drill template. Pan: 0°~240° 2.
PAGE 9
Video Connection VTD-THMD2RF Components Connect the BNC video connector to a BNC cable, then to a DVR. Monitor Camera Screws Manual Hex Wrench Drill Template Overview Video Video Output Mode Switch: 3 Select the desired video mode using the dip switches contained within the on-cable Output Mode Switch as follows: 4 5 1 ON ON 1 2 2 1 ON 2 AHD 1 ON 2 HD-TVI 1 ON 2 CVI 1 2 CVBS Power Connection Connect the power connector to a regulated 12 VDC power adaptor.
PAGE 10
Installation Before beginning installation, make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 4. Before adjusting the three-axis camera mount, preview the camera on a monitor, then adjust as necessary achieve the optimum viewing angle. 1. Attach the drill template to the place where you want to install the camera, then drill the screw holes and 1 cable hole according to the drill template. Pan: 0°~360° 2.
PAGE 11
Camera OSD Menu The Transcendent 4-in1 camera series must be connected to a DVR which supports HD-TVI/AHD video signal input and COC protocol to access the OSD setup menu. Different DVRs manufacturers may have different modes of menu operation. The Following image will pop-up when you left click once on the image when using Transcendent HDA DVR's. You will see the following interface by clicking the PTZ button. You can select the menu by clicking (U) or (D) key on the direction area.
PAGE 12
Preliminary Specifications: VTC-THB36R2F Transcendent 2.1 Megapixel Indoor/Outdoor 4-IN-1 HDA Bullet Camera w/36 IR LED Illumination Preliminary Specifications: VTD-THD16R2F VTC-THB36R2F Specifications Transcendent 2.1 Megapixel Indoor/Outdoor 4-IN-1 HDA Vandal Dome Camera w/16 High Power Covert IR LED Illumination VTD-THD16R2F Specifications Image Sensor 1/2.8” 2.
PAGE 13
Preliminary Specifications: VTD-THMD2RF-2 Transcendent 2.1 Megapixel Indoor/Outdoor 4-IN-1 HDA Dome Camera w/10 IR LED Illumination Preliminary Specifications: VTC-THT24R2F VTD-THMD2RF-2 Specifications Transcendent 2.1 Megapixel Indoor/Outdoor 4-IN-1 HDA Turret Camera w/24 IR LED Illumination VTC-THT24R2F Specifications Image Sensor 1/2.8” 2.
PAGE 14
PAGE 15
TRANSCENDENT MOUNTS ALSO AVAILABLE FOR 4-IN-1 CAMERAS! VT-TJB01 VT-TJB03A Optional Junction Box for Cable Management for use with all Transcendent Bullet and Turret Style Cameras (VTC-THB36R2F / VTCTHT24R2F) Optional Junction Box for Cable Management for use with Select Transcendent Vandal Dome Cameras (VTD-THD16R2F) VT-TWMT3 Optional Wall Mount for use with most Transcendent Fixed Domes and Turrets (VTC-THT24R2F / VTDTHD16R2F) 15
PAGE 16
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.COM Version 3.