User Manual

11
Installation Instructions
.
0.2M
VIDEO (BNC)
AC24V/GND (Black wire)
AC24V/DC12V (Red wire)
RTX- (Gray wire)
RTX+ (White wire)
Power Supply Connections
Make sure the power is removed before installation.
Camera can work with either 24VAC or 12VDC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems.
In case that HD-SDI Inputs are not supported by Monitor, please use HD-S DI
Converter to connect HD-SDI cable with Monitor
Some computer monitors or TVs may not support 30p/25p.
Please check Specification of Monitor before installation.