VTC-IRE70/650 Day/Night Infrared 700 TV Line Bullet Camera w/300’ Range VITEK • High Density 1/3” Sony EXVIEW CCD & Effio-E DSP • 700TVL High Resolution • E-WDR by Adaptive Tone Reproduction • 70 Infrared LEDs at 840nm enable viewing in total darkness up to 300 feet • Infrared LED Dynamic Intensity Control with Automatic Brightness Adjustment of IR LEDs to help prevent washed out images when objects are too close • Camera and IR LED compartments are separated using a dual glass design to prevent stray IR
1. Safety Instructions and Notes ....................................................................................................................................................... 2 2. General Descriptions ........................................................................................................................................................................ 2 3. Supplied Items .................................................................
WARNING This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. This symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
2. General Descriptions The VTC-IRE70/650 camera is an ultra clear resolution camera that realizes over 700TVL resolution and a crisp color reproduction with Sony 960H EX-view CCD and Effio-E image signal processor.
4. Part Names 4.1 Front view ⓐ ⓓ ⓔ ⓑ ⓒ ⓖ ⓕ Sunshield attachment thumb screw IR LED Panel Double Glass Window Sunshield OSD (On Screen Display Control) Cover Arm Assembly ⓖ Mounting Bracket Foot 4.
5. Installation Instructions • Make sure the power is not applied before installation. • Once the camera is installed, you must first connect the low voltage (AC24V or DC12V). Then, plug the AC adapter into the AC outlets to avoid an improper reset and damage from a possible surge voltage. 5.1.
The FACTORY DEFAULT in this manual may NOT be the same as the default values set by the FACTORY due to feature improvements or customer requirements. To enter menu, press ● when MENU is not active. 6.2 MAIN menu Follow the chart for submenu settings. MAIN menu-1 MAIN menu-2 6.2.1 MAIN menu-1 MAIN menu-1 Default Descriptions SHUTTER /AGC AUTO Sets the parameters related to the shutter mode and AGC for AUTO and MANUAL settings. See '6.3 SHUTTER/AGC menu' for details.
6.2.2 MAIN menu-2 MAIN menu-2 Default NR - MOTION DET OFF Sets ON/OFF for enabling/disabling MOTION DET. See '6.10 MOTION DET menu' for the parameter settings. PRIVACY OFF Sets ON/OFF for enabling/disabling PRIVACY. See '6.11 PRIVACY menu' for the parameter settings. LANGUAGE ENGLISH CAMERA ID OFF CAMERA RESET Descriptions Sets the noise reduction parameters for NR MODE and Y LEVEL, C LEVEL. See '6.9 NR menu' for details. Selects 1 out of 7 languages.
6.3.1 SHUTTER/AGC>AUTO SETUP menu AUTO SETUP Default Descriptions Sets the shutter mode from AUTO IRIS or SHUT+AUTO IRIS when MAIN>LENS>AUTO menu, but it is fixed to SHUT if in the MAIN>LENS>MANUAL menu. AUTO IRIS - Light level is controlled by an auto iris lens only. For proper auto iris operation, the auto iris operation mode in MAIN> LENS>AUTO>MODE must be set to AUTO. HIGH LUMINANCE MODE AUTO IRIS The shutter speed is fixed to the setting at MAIN>SHUTTER/AGC> MANUAL> SHUTTER.
6.3.2 SHUTTER/AGC>MANUAL SETUP menu MANUAL SETUP Default MODE SHUT +AGC Compensates the video level by the manual shutter control and AGC. SHUTTER 1/60 (1/50) Sets the manual shutter to 1/60(1/50), 1/100(1/120), 1/250,1/500,1/1000, 1/2000, 1/4000 or 1/10000. Manual shutter is only useful when luminance is unchanged. AGC 6.00 Sets AGC gain in dB. Higher gain compensates brighter but noise increases. Manual AGC can be set to 6, 12, 18, 24, 30, 36, 42 or 44.8dB. Descriptions 6.
6.5 DAY/NIGHT menu To enter DAY/NIGHT menu, press ● button at MAIN menu-1>DAY/NIGHT. IMPORTANT ACTIVITY!!! DAY->NIGHT and NIGHT->DAY operations must be examined and verified at the final installation. Block the lens for a few seconds for NIGHT mode and release and let it return to DAY mode. If camera stays at NIGHT mode for more than 10 seconds, decrease NIGHT→DAY THRES and repeat the fore-mentioned steps. If the scene is too dim or the lens iris was adjusted too low (near close), it may not return to DAY.
NIGHT→ DAY. NIGHT→DAY is a threshold level that determines whether or not to switch from NIGHT to DAY. A lower (higher) value makes the camera switch from Night to Day at a lower (higher) illumination. If it stays in Night (B/W) mode at day time, decrease NIGHT→DAY threshold value until it switches to Day. Examine and verify Day/Night operation according to IMPORTANT ACTIVITY. 3 CAUTION If the gap between DAY→ NIGHT and NIGHT→ DAY is not big enough, camera may repeatedly switch from Day↔ Night.
6.7 WHITE BAL menu White balance can be set to ATW, PUSH, USER1, USER2, ANTI CR, MANUAL or PUSH LOCK. ATW (Auto Tracking White balance) and PUSH (Full pull-in) is continuously monitoring/analyzing the color temperature of the incoming light and correcting the white balance. ATW limits the color temperature range to about 2,500˚K~8,500˚K to reduce the excessive compensation for a large object that has a single color.
MANUAL WB Default LEVEL 064 Descriptions Adjusts the manual white balance by LEVEL, (B-GAIN). 6.8 ATR (Adaptive Tone Reproduction) Menu The ATR feature improves the dynamic range and the visibility of the image by providing the optimal gradation compensation of the image in one field. This is achieved by two ways of image processing, luminance compression and contrast enhancement, so that the tone can be enhanced in highlighted and dark areas. To enter ATR menu, press ● button at MAIN menu-1>ATR.
6.9 BACKLIGHT menu To enter BACKLIGHT menu, press ● button in MAIN menu-1>BACKLIGHT. The Backlight Compensation – BLC – function is used to brighten an image in the foreground with a highly lit area behind it such as sunlight, limiting the affect of silhouetting.
NR Default Descriptions NR MODE Y/C Selects OFF, Y, C or Y/C, which noise reduction is performed with. Y LEVEL 006 Indicates the noise reduction strength for the luminance signal. A higher value performs a stronger noise reduction, which makes the image less sharp. C LEVEL 004 Indicates the noise reduction strength for the chrominance signal. A higher value performs a stronger noise reduction and makes the image less sharp. 6.
6.12 PRIVACY menu Up to 8 privacy areas are available and each area is programmable in size and location. The number of privacy areas is limited to four when MOTION DET>MONITOR AREA is ON. The privacy areas are masked with the color selected in PRIVACY>COLOR. To enter PRIVACY menu, press ● button at MAIN menu-2>PRIVACY>ON. PRIVACY AREA SEL Default Descriptions 1/8 Selects one of AREA1~AREA8 to be adjusted.
6.14 CAMERA ID menu Up to 40 characters can be input for camera ID. To enter CAMERA ID menu, press ● button at MAIN menu-2>CAMERA ID. CAMERA ID input line COMMAND LINE Use ▲,▼, , buttons to move a block cursor in the character table and press ● button to input the selected character. To move the character input position on CAMERA ID input line, move a cursor to ←→ on COMMAND LINE and press ● button on ← or →. To clear CAMERA ID input line, move a cursor to CLR on COMMAND LINE and press ● button.
7. Specifications Model Name VTC-IRE70/650 Image Device 1/3” High Density Sony EX-VIEW CCD & Effio-E DSP (960H) Effective Pixels 976(H) x 494(V) Resolution Minimum illumination 700 TV lines 0.0035Lux / F1.
8. Dimensional Drawings 214mm / 8.4in 228.5mm 9in 172mm 6.8in 280.2mm / 11.03in 100mm 3.93in 214mm / 8.42in 72.1mm / 2.8in 58mm 2.3in 58mm 2.3in 72.1mm 2.8in 280.2mm / 11.
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
VTC-IRE70/650 Day/Night Infrared 700 TV Line Bullet Camera w/300’ Range VITEK • High Density 1/3” Sony EXVIEW CCD & Effio-E DSP • 700TVL High Resolution • E-WDR by Adaptive Tone Reproduction • 70 Infrared LEDs at 840nm enable viewing in total darkness up to 300 feet • Infrared LED Dynamic Intensity Control with Automatic Brightness Adjustment of IR LEDs to help prevent washed out images when objects are too close • Camera and IR LED compartments are separated using a dual glass design to prevent stray IR
