VTC-C2B-HS 2.1MP HD-SDI Smart WDR Camera VITEK FEATURES: • 1/2.9” Sony CMOS • 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M) • Smart Motion Zoom tracks motion, then intelligently zooms into that area of the frame • Mechanical IR Cut Filter (True Day/Night) • Small scale design to fit in 5” dome enclosures such as the Pelco DF5 Housing • Fully programmable advanced WDR • Sensitivity of 0.
FULL-HD MEGA-PIXEL CAMERA Safety Precaution To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source. CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FULL-HD MEGA-PIXEL CAMERA Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing in areas where shock or vibration may occur. Pay attention to safety when running the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in. Never open the device. The warranty becomes void if repairs are undertaken by unauthorized persons.
FULL-HD MEGA-PIXEL CAMERA Contents p.02~03 Safety Precaution p.04 Contents p.05 Features p.06 Composition p.06 Dimensions p.07 Part Names p.08~09 Installation Instructions p.10~22 Operating Instructions p.
FULL-HD MEGA-PIXEL CAMERA Features Key Features • • • • • • • • • • • • • • • • • Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p) True WDR(Wide Dynamic Range) Improved Noise filter with the enhanced 3D-NR CS mount supported (Option: C-mount adaptor) Non Compressed digital streaming up to 1.485Gbps. Intelligent focusing status indicator on screen Dual Filter Switcher Pointing Zoom which enables the flexible zooming of any area. Smart Motion Zoom in combination with Pointing Zoom.
FULL-HD MEGA-PIXEL CAMERA Composition Operating Instruction Compact Box Camera Video Sub-out Cable (1pc) Dust Protection Cap (1pc) Dimensions (unit : inches) 2.87 2.38 1.89 2.09 1.73 1.81 06 L- Wrench: 1.
FULL-HD MEGA-PIXEL CAMERA Part Names Mount Holes (Top / Bottom) Flange Lock screw L-Wrench Dust Protection Cap Rear Case Back focus adjusting Flange Front Case REAR VIEW ① ③ ④ ② PIN 4 PIN 3 PIN 2 PIN 1 07 ① Video out connector(BNC) ② Power input terminal ③ OSD Control Joy stick ④ DC Auto Iris Lens connector Lens Connector for Auto Iris lenses No.
FULL-HD MEGA-PIXEL CAMERA Installation Instructions Installation and commissioning Instructions • Make sure the power is removed before installation. • Follow the order for applying power. When using 12VDC or 24VAC power make power connections at camera first then apply power. this will help avoid unnecessary power surges to camera. 1. Remove the dust protection cap from the lens mount. 2. Screw the lens onto the camera firmly (do not over tighten). 3.
FULL-HD MEGA-PIXEL CAMERA Installation Instructions Using OSD Controller Setup menu can be accessed and controlled by OSD control joy stick on the rear of the camera unit. Five commands are available with the joy stick. The design of rear panel could be different according to the camera models. Description of the joystick operation 1) SET Key (●) : Access to the menu or enter the setting.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions OSD menu Startup Press ‘●’(OSD menu Joy stick key) down for about 2 seconds to access the setup menu mode. MENU V3.12 1. EXPOSURE 2. LENS 3. FOCUS ASSIST 4. SCENE ENHANCE 5. 3D-NR 6. DAY/NIGHT 7. PICT ADJUST 8. SPECIAL 9. SYSTEM A. EXIT DC NORMAL MID AUTO SAVE&EXIT Direct Control menu MAIN EXPOSURE LENS FOCUS ASSIST SCENE ENHANCE DEFAULT DC - DESCRIPTION Sets EXPOSURE MODE, BRIGHTNESS, SENS-UP, AGC and MOTION DEBLUR. Sets Lens types.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions SCENE ENHANCE 3D-NR DAY/NIGHT NORMAL BLC – Improves the visibility of bright back light. Outside area of BLC window can over saturate. BLC has a target window for compensation and its size and position can be set by H-POS, V-POS, H-SIZE and V-SIZE. HLC – Cuts out the bright area with black mask and excludes it from compensation. Lower HLC LEVEL the more sensitive it is to bright light. MID Enables to set OFF, LOW, MID and HIGH.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 1. EXPOSURE EXPOSURE SHUTTER BRIGHTNESS SENS-UP AGC RETURN AUTO |:::::::|::::::| 10 OFF |:::::::|::::::| 12 RET 1-1. SHUTTER (default: AUTO) : Ability to set EXPOSURE MODE to AUTO, MANUAL and Flickerless. MANUAL and Flickerless modes disable SENS-UP and MOTION BLUR functions. • AUTO: Optimizes the video level by controlling the iris and the shutter speed automatically. • MANUAL: Iris and Shutter can be set to fix.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 2. LENS Lens can be selected either DC or MANUAL lens. Lens MUST be set to DC for the best image when DC iris lens is installed DC MODE RETURN MANUAL DEBLUR RET MODE RETURN NORMAL RET 2-1. DC (default: DEBLUR for None LED type) : Selects lens mode according to installation location. INDOOR or DEBLUR for indoor installation according to environment. • OUTDOOR: Optimized for outdoor environment. • INDOOR: Optimized for indoor environment.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions FOCUS ASSIST menu is a unique and patented feature that assists in focusing by simulating DAY & NIGHT conditions. Set zoom first and adjust focus to get best picture when switching from DAY to NIGHT. • DN DWELL (5s): ICR switcher switches DAY to NIGHT and back at the interval of D/N DWELL to help with focusing in DAY and NIGHT modes. • POP ON FOCUS (OFF): ON zooms into the center of the picture at 2X for better focusing.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 4-4. GAMMA (default: 0.5) : Adjusts the gamma of video. 4-5. SHADING (default: OFF) : ON enables the ability to compensate the shade caused by a wide lens setting. 5. SPECIAL SPECIAL MIRROR/FLIP PRIVACY MOTION PIXEL DEFECT TITLE SET DISPLAY DEFOG POINTING ZOOM RETURN OFF OFF OFF OFF RET 5-1. MIRROR/FLIP (default: OFF) : Reverses the video left and right and/or up and down by MIRROR/FLIP. • OFF : Normal display without mirroring or flipping • Hor.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 5-3. MOTION (default: OFF) : MOTION can detect the changes in the motion window and displays the results in blocks and/or a text message on screen. • SENSITIVITY : Adjusts the detection sensitivity for motion. Higher value increases the sensitivity to detect small motion easier. Too low of sensitivity will cause erratic detection. • H-POS, V-POS, H-SIZE, V-SIZE: Adjust the size and position of the detection window.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 5-5. TITLE SET : Camera title(name) can be set and edited up to 15 alpha numeric and symbolic characters from ASCII codes(ENGLISH only). ▲,▼,◀,▶ moves the cursor to next input. Choose a character and ‘☟’selects it. The selected characters are added and displayed on the top left Corner and the cursor moves right automatically for next input.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions Detail Function Description ▐ SMART MOTION ZOOM SMART MOTION ZOOM enlarges the area defined by a yellow window to a full size image when motion is detected in the black window. SMART MOTION ZOOM window can be re-sized by adjusting D-ZOOM RATIO and moved by H-POINTER and V-POINTER. UNLIKE the conventional zoom which can zoom in/out the center area of image only, the flexible zoom location and area, SMART MOTION ZOOM differentiates its usefulness from others.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions ▐ POINTING ZOOM This camera has a very useful and powerful feature, POINTING ZOOM, which can zoom in/out of any area in the scene. UNLIKE the conventional zoom which can zoom in/out the center area of image only the flexible zoom location and area POINTING ZOOM differentiates its usefulness from others.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions * EXAMPLE OF SMART MOTION & POINTING ZOOM 20
FULL-HD MEGA-PIXEL CAMERA Operating Instructions 6. SYSTEM SYSTEM TV SYSTEM RESOLUTION COMM. SETUP LANGUAGE FACTORY DEFAULT RETUTN US(NT) 1080P ENG☟ NO RET 5-1. TV SYSTEM (default: US or EU) : Selects HDTV standards for US(60HZ) or EU(50HZ). By this selection, 2nd analog video output switches to NTSC or PAL accordingly. 5-2. RESOLUTION (default: 1080P) : Three resolutions,1080P/720P(SCALED)/720P(CROPPED) are available. 1080P outputs 1920x1080 video at the frame rate of 30P/25P.
FULL-HD MEGA-PIXEL CAMERA Operating Instructions TIP Setting for RS-485 Communication with PTZ Controller ● Enter the MENU : Press buttons 9+5+PSET (PRESET) ● Move the cursor in the MENU : Moves UP/DOWN/LEFT/RIGHT Joy stick ● Select or Choose value in the MENU : Press button OPEN (IRIS OPEN) ● D-Zoom IN : Press button TELE ● D-Zoom OUT : Press button WIDE 22
Detailed Specifications 1/2.9” Sony® CMOS Sensor 2.1 MegaPixel (1080p / 720p) Resolution More than 50 dB (AGC Off) S/N Video Output 1x HD-SDI (BNC) / 1x SD CVBS (BNC) Lens CS Mount Lens Support (Not Included) 1.1x ~ 8x Digital Zoom Minimum Illumination Day/Night Electronic shutter speed White Balance .0005 Lux (@AGC Max.
LIMITED LIABILITY WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
