Quick Start Guide

8. UPnP
You can use the UPnP function to enable a fast connection of the device to
WAN via a router without port mapping.
1
click “Apply” button to save.
2 Enable the UPnP function in the router.
3 Click “Refresh” button to refresh the UPnP status. If the UPnP status is still
“Invalid UPnP” after refreshing it several times, the port would be wrong.
Please change the mapping type to “Manual” and then click to modify
the port until the UPnP status turns to “valid UPnP”.
7. Network Configuration & Adding IP Cameras
1
gateway, etc. If using DHCP, please enable DHCP in both the DVR and the router.
2
6036).
3 Click “Apply” to save the settings.
4
IPC which supports Onvif protocol may be added manually. If the IPC searched is not in the same local network as
the DVR, you should select the device and click to modify the IP address.
5 Highlight the device you want to add and then click “Add” button. The DVR will automatically refresh the cameras
and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see
the live image. You may select the added device and click to modify channel, IP address, ect.
Port
TCP/IPv4
DDNS
E-mail
NAT
IP Address Settings
Obtain an IP address automatically
Ether n e t Po r t 1 ( O n l i n e )
Obatin DNS server address automatically
IP Address
Preferred DNS
192 . 168 . 1 . 2
0 . 0 . 0 . 0
192 . 168 . 1 . 1
192 . 168 . 1 . 1
0 . 0 . 0 . 0
Subnet Mask
Alternate DNS
Gateway
UPnP Network Status
4.0.0.1.beta1
Version
80
No.
IP Address
EditPort
Protocol Model
Subnet Mask
1
192.168.2.45
XXXXXX
255.255.255.0
Qu ickl y A d d
M anu ally A d d
Ad d Cam er a
Selecte d: 1/1
Add
Default Password
Rem ain Ban d w id t h : 1 0 / 10 M b
Cancel
Mac Address
IP Address
Edit IP
192 .168 . 1 . 45
255 . 255 . 255 . 0
admin
192 .168 . 1 . 1
Subnet Mask
Username
Gateway
Password
OK Cancel
CE :98 :23 :75 :35 :22
Display Passwo rd
Camera Name
IP Address
Model
Edit Camera
XXX
192 .168 . 1 . 58
80
admin
XXX
Port
Username
Protocol
Password
IP Camera 1
OKTest Cancel
DeleteEdit
No. Camera N am e
IP Address
Port
Protoc ol Model
Previe w
Status
Edit Camera
Edit Camera GroupSignal Access Set
Search Camera
1
2
3
4
5
192.16 8. 1. 45IP Camera 1
[A01]C am er a1
[A02]C am er a2
[A03]C am er a3
[A04]C am er a4
XXX
Online
XXX
80
1
PPPoE and then input the user name and password received from your ISP.
2
address, server port, username and password of the IP camera. The IP camera must be connected over WAN.
And here the IP address of the IP camera must be a WAN IP address.
HTTP Port
Server Port
80
6036
80183.17.254.19 Valid UPnP
Valid UPnP
Invalid UPnP
6036183.17.254.19
Port Type
External Port
External Address
UPnP Status Edit
Port
RTSP Port
554
554
TCP/ IPv4
Port UPnP
DDNS
E-mail NAT Network Status
AutoMap Type
UPnP
Enable
Refresh Apply