Manual

Device Management
DVR User Manual
92
HTTP Port: the default HTTP port of the DVR is 80. The port number should be changed to
others like 81. The port is mainly used to client remote access. If you want to access the DVR
through a web browser, you should enter IP address plus HTTP port in the address bar like
http://192.168.11.61:81.
HTTPS Port: the default HTTPs port of the DVR is 443.
HTTPs provides authentication of the web site and protects user privacy. How to use it?
Enter IP address plus HTTP port in the address bar of the web browser. Then enter
username and password to log in. Click Functional Panel
Network HTTPS to go to the
following interface.
Install a certificate.
* You can create a private certificate here. Click the “Create” button to create a private
certificate. Enter the country (only two letters available), domain (NVR’s IP address/domain),
validity date, password, province/state, region and so on. Then click “OK” to save the settings.
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
* Click “Create a certificate request” to enter the following interface.
Click “Creat
e” to create the certificate request. Then download the certificate request and
submit it to the trusted certificate authority for signature. After receiving the signed certificate,
import the certificate to the device.
Device Management
DVR User Manual
92
HTTP Port: the default HTTP port of the DVR is 80. The port number should be changed to
others like 81. The port is mainly used to client remote access. If you want to access the DVR
through a web browser, you should enter IP address plus HTTP port in the address bar like
http://192.168.11.61:81.
HTTPS Port: the default HTTPs port of the DVR is 443.
HTTPs provides authentication of the web site and protects user privacy. How to use it?
Enter IP address plus HTTP port in the address bar of the web browser. Then enter
username and password to log in. Click Functional Panel
Network HTTPS to go to the
following interface.
Install a certificate.
* You can create a private certificate here. Click the “Create” button to create a private
certificate. Enter the country (only two letters available), domain (NVR’s IP address/domain),
validity date, password, province/state, region and so on. Then click “OK” to save the settings.
* If there is a signed certificate, click “Browse” to select it and then click “Install” to install it.
* Click “Create a certificate request” to enter the following interface.
Click “Create” to create the certificate request. Then download the certificate request and
submit it to the trusted certificate authority for signature. After receiving the signed certificate,
import the certificate to the device.