Manualshelf

Manual

ManualsBrandsVitek ManualsDigital Video Recorders16 Channel 5-In-1 HD-TVI / AHD / CVI / 960H / IP Digital Video Recorder, 6TB
81828384858687888990
Alarm Management
DVR User Manual
74
Select the camera and enable the relevant detection as needed.
Scene Change: Alarms will be triggered if the scene on the cameras video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
Set the sensitivity of the exception detection.
Click “Apply” to save the settings.
Click “Processing Mode” to go to the alarm handling configuration interface of exception
detection.
Exception Alarm Handling Configuration:
Click Start Settings Alarm Intelligence Alarm Exception to go to the interface.
Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,
“Pop-up Video” and “E-mail”. The alarm handling setting of exception detection alarm is
similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
Click “Apply” to save the settings. You can click “Exception Config” to go to the
exception detection configuration int
erface.
9.3.3 Tripwire
Tripwire/Line Crossing Configuration:
Alarms will be triggered if someone or something crosses the pre-defined alarm line.
Alarm Management
DVR User Manual
74
Select the camera and enable the relevant detection as needed.
Scene Change: Alarms will be triggered if the scene on the cameras video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
Set the sensitivity of the exception detection.
Click “Apply” to save the settings.
Click “Processing Mode” to go to the alarm handling configuration interface of exception
detection.
Exception Alarm Handling Configuration:
Click Start Settings Alarm Intelligence Alarm Exception to go to the interface.
Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,
“Pop-up Video” and “E-mail”. The alarm handling setting of exception detection alarm is
similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
Click “Apply” to save the settings. You can click “Exception Config” to go to the
exception detection configuration interface.
9.3.3 Tripwire
Tripwire/Line Crossing Configuration:
Alarms will be triggered if someone or something crosses the pre-defined alarm line.