Manual

Alarm Management

DVR User Manual

Select the camera, enable the motion and set the sensitivity and duration of the camera.

Sensitivity: the higher the value is, the more sensitive it is to motion. You should adjust the

value according to the conditions since the sensitivity is influenced by color and time (day or

night).

Duration: it refers to the interval time between motion detections. For instance, if the duration

time is set to 10 seconds, once the system detects motion, it will go into alarm and would not

detect any other motion (specific to camera) for 10 seconds. If there is another motion detected

during this period, it will be considered as a continuous movement; otherwise it will be

considered as a single motion.

Drag the camera image to set the motion area. You can set more than one motion area.

Click “All” to set the whole camera image as the motion area. Click “Reverse” to swap the

motion area and the non-motion area. Click “Clear” to clear all the motion areas.

Click “Apply” to save the settings. Click “Processing Mode” to go to the alarm handling

configuration interface of the motion alarm.

9.2.2 Motion Alarm Handling Configuration

Click Start Settings Alarm Motion Alarm to go to the following interface.