Manual

Alarm Management

DVR User Manual

Configure the trigger alarm-out in the window. The system will trigger the alarm-out

automatically when the sensor alarm is triggered. You need to set the delay time and the

schedule of the alarm outputs. See 9.5.1 Alarm-out for details.

Preset: check it and then the “Trigger Preset” window will pop up automatically. Configure the

trigger preset of each camera. To add presets, please see 6.2 Preset Setting for details.

Buzzer: if enabled, the system will begin to buzz when the sensor alarm is triggered. To set the

delay time of the buzzer, please see 9.5.4 Buzzer for details.

Pop-up Video: After camera setting, the system will pop up the corresponding video

automatically when the sensor alarm is triggered. To set the duration time of the video, please

see 9.5.3 Display for details.

Pop-up Message Box: if enabled, the system will pop up the corresponding alarm message box

automatically when the sensor alarm is triggered. To set the duration time of the mess

age box,

please see 9.5.3 Display for details.

E-mail: if enabled, the system will send an e-mail when the sensor alarm is triggered. Before

you enable the email, please configure the recipient’s e-mail address first (see 11.1.5 E-mail

Configuration for details).

9.2 Motion Alarm

Motion Alarm: when motion appears in the specified area, it will trigger the alarm. You should

enable the motion of each camera first and then set the alarm handling of the camera to

complete the whole configur

ation of the motion alarm.

9.2.1 Motion Configuration

Click Start Settings Camera Motion to go to the following interface.