Manual

Playback & Backup
DVR User Manual
65
to select the time slice mode.
Method Three: Right-click the mouse on any area of the time-sliced interface to go back to the
upper interface.
8.4.2 Smart Search
Click Start Search and Backup Smart Search to go to “Smart Search” tab as shown
below.
Behavior Detection: when you select the smart playback mode, the system will analyze the
video including the motion detection, tripwire and intrusion detection.
Click “Behavior”. Set the searching time period and you will search the channel which has
the intelligence detection record.
Check the channel and select the smart playback.
Set the backup time and select the channel to backup.
: Smart playback settings button. Click it to set intrusion percentage.
: Full screen motion button.
: Motion button.
: Draw line button. You can search the recording of crossing the line after drawing the line.
: Draw quadrilateral. You can search the recording in this quadrilateral after drawing it.
8.4.3 Search, Playback & Backup by Time
Click Start Search and Backup By Time to go to “By Time” tab as shown below.
Click on the bottom of the interface to add playback camera. Click “Modify” on the
top right corner of the camera window to change the camera and click “Clear” to remove the
camera.
Click the camera window to play the recording in the small playback box on the left side of
Playback & Backup
DVR User Manual
65
to select the time slice mode.
Method Three: Right-click the mouse on any area of the time-sliced interface to go back to the
upper interface.
8.4.2 Smart Search
Click Start Search and Backup Smart Search to go to “Smart Search” tab as shown
below.
Behavior Detection: when you select the smart playback mode, the system will analyze the
video including the motion detection, tripwire and intrusion detection.
Click “Behavior”. Set the searching time period and you will search the channel whi
ch has
the intelligence detection record.
Check the channel and select the smart playback.
Set the backup time and select the channel to backup.
: Smart playback settings button. Click it to set intrusion percentage.
: Full screen motion button.
: Motion button.
: Draw line button. You can search the recording of crossing the line after drawing the line.
: Draw quadrilateral. You can search the recording in this quadrilateral after drawing it.
8.4.3 Search, Playback & Backup by Time
Click Start Search and Backup By Time to go to “By Time” tab as shown below.
Click on the bottom of the interface to add playback camera. Click “Modify” on the
top right corner of the camera window to change the camera and click “Clear” to remove the
camera.
Click the camera window to play the recording in the small playback box on the left side of