Manual
Playback & Backup
DVR User Manual
63
disk or USB mobile HDD). The file system of the backup devices should be FAT32 format.
8.4.1 Search, Playback & Backup by Time-sliced Image
Click Start Search and Backup By Time-sliced Image to go to “By Time-sliced Image”
tab. There are two view modes: by time and by camera. In the time view mode, a maximum of
64 camera thumbnails can be shown. If the camera thumbnail number is more than 64, the
cameras will be listed directly by their camera name, not the thumbnail. A maximum of 196
camera names can be listed. If the camera name number is more than 196, the time view mode
will be disabled and the camera view mode will be available only.
Select one camera in the interface and then click the “Open” button.
Click the image box to play the recording in the small playback box on the left side of the
interface (the box which has image inside indicates that the recorded data exist).
Refer to the picture below. Drag the color blocks on the time scale to select the recorded
data and then click the “Backup” button to pop up the “Record Backup” window as shown
below. Select the device name, backup format and path and then click the “Backup” button to
start the backup.
Playback & Backup
DVR User Manual
63
disk or USB mobile HDD). The file system of the backup devices should be FAT32 format.
8.4.1 Search, Playback & Backup by Time-sliced Image
Click Start Search and Backup By Time-sliced Image to go to “By Time-sliced Image”
tab. There are two view modes: by time and by camera. In the time view mode, a maximum of
64 camera thumbnails can be shown. If the camera thumbnail number is more than 64, the
cameras will be listed directly by their camera name, not the
thumbnail. A maximum of 196
camera names can be listed. If the camera name number is more than 196, the time view mode
will be disabled and the camera view mode will be available only.
Select one camera in the interface and then click the “Open” button.
Click the image box to play the recording in the small playback box on the left side of the
interface (the box which has image inside indicates that the recorded data exist).
Refer to the picture below. Drag the color blocks
on the time scale to select the recorded
data and then click the “Backup” button to pop up the “Record Backup” window as shown
below. Select the device name, backup format and path and then click the “Backup” button to
start the backup.