Manual

Playback & Backup
DVR User Manual
60
Zoom In
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click to pause the record playing; click to play the
record. When the record is paused in forward playing mode, you
can click to view the previous frame and click to
view the next frame.
Add Tag
Click it to add tag. You can play back the recording by searching
the added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera
Click it to close the playback camera.
Introduction of area
:
Click to set the date; click to set the time and then the playback camera will play
the recording from the time you set. You can check the recording type as required for recording
playback; first you should click
on the tool bar at the bottom of the interface to clear all
the playback cameras, then check the record type ( : manual record; : sensor based
record; : motion based record; : schedule record; : intelligence record; : POS
record) and finally click
in the playback window to add camera for playback (the
recording time scale will show the recorded data of the checked recording type only after the
above operations).
Introduction of the recorded time scale (area ) :
A tool bar will appear after moving the mouse to the recorded time scale. Click /
to zoom the timeline; click to recover the timeline to 24 hours’ ratio. Drag the timeline
or slide the scroll wheel of the mouse on the time scale to show the hidden time at the top or
bottom of the timeline. You can also click to show the hidden time at the top of the
timeline or click to show the hidden time at the bottom of the timeline. Drag the slider at
the bo
ttom of the time scale to show the hidden playback cameras.
The recorded time scale shows different recording types with different colors. The green block
stands for manual record, red block stands for sensor based record, yellow block stands for
motion based record, blue block stands for schedule record and cyan block stands for
intelligence record. Click the recording block to set the time and then the playback camera will
play the recording from the time you set.
Drag the
color block on the time scale to select the backup area and then right click the area or
click to pop up a backup information window. Click the “Backup” in the window to pop
up the backup window. Select the device, backup path and backup format and then click the
“Backup” button to start the backup.
8.3 Smart Playback
Smart Playback Settings
Playback & Backup
DVR User Manual
60
Zoom In
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click to pause the record playing; click to play the
record. When the record is paused in forward playing mode, you
can click to view the previous frame and click to
view the next frame.
Add Tag
Click it to add tag. You can play back the recording by searching
the added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera Click it to close the playback camera.
Introduction of area
:
Click to set the date; click to set the time and then the playback camera will play
the recording from the time you set. You can check the recording type as required for recording
playback; first you should click
on the tool bar at the bottom of the interface to clear all
the playback cameras, then check the record type ( : manual record; : sensor based
record; : motion based record; : schedule record; : intelligence record; : POS
record) and finally click
in the playback window to add camera for playback (the
recording time scale will show the recorded data of the checked recording type only after the
above operations).
Introduction of the recorded time scale (area ) :
A tool bar will appear after moving the mouse to the recorded time scale. Click /
to zoom the timeline; click to recover the timeline to 24 hours’ ratio. Drag the timeline
or slide the scroll wheel of the mouse on the time scale to show the hidden time at the top or
bottom of the timeline. You can also click to show the hidden time at the top of the
timeline or click to show the hidden time at the bottom of the timeline. Drag the slider at
the b
ottom of the time scale to show the hidden playback cameras.
The recorded time scale shows different recording types with different colors. The green block
stands for manual record, red block stands for sensor based record, yellow block stands for
motion based record, blue block stands for schedule record and cyan block stands for
intelligence record. Click the recording block to set the time and then the playback camera will
play the recording from the time you set.
Drag the color
block on the time scale to select the backup area and then right click the area or
click to pop up a backup information window. Click the “Backup” in the window to pop
up the backup window. Select the device, backup path and backup format and then click the
“Backup” button to start the backup.
8.3 Smart Playback
Smart Playback Settings