Manual

PTZ
DVR User Manual
44
Add preset
Select camera and then click Add button to add preset; or click in the camera list on
the right side of the interface to display the preset information of the dome and then click
to add preset. The operations of the Add Preset window are similar to that of the
PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.
Edit preset
Select camera and preset. You can enter a new name of the preset and then click to save
the new pre
set name. Adjust the rotating speed, position, zoom, focus and iris of the preset and
then click Save Position to save the preset.
Delete Preset
Select camera and preset and then click Delete to delete the preset.
6.3 Cruise Setting
Click Start Settings Camera PTZ Cruise to go to the interface as shown below.
Add Cruise
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click to add cruise. The o
perations of the Add Cruise
window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface
Introduction for details.
PTZ
DVR User Manual
44
Add preset
Select camera and then click “Add button to add preset; or click in the camera list on
the right side of the interface to display the preset information of the dome and then click
to add preset. The operations of the “Add Preset” window are similar to that of the
PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.
Edit preset
Select camera and preset. You can enter a new name of the preset and then click to save
the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and
then click “Save Position” to save the preset.
Delete Preset
Select camera and preset and then click “Delete” to delete the preset.
6.3 Cruise Setting
Click Start Settings Camera PTZ Cruise to go to the interface as shown below.
Add Cruise
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click to add cruise. The operations of the “Add Cruise
window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface
Introduction for details.