Manual

Wizard & Main Interface
DVR User Manual
11
3 Wizard & Main Interface
3.1 Startup Wizard
The disk icons will be shown on the top of the startup interface. You can view the number and
status of each disk quickly and conveniently through these icons ( : no disk; : unavailable
disk; : RW available disk).
You can quickly configure the DVR by using the wizard setup to make the DVR work
normally. You must configure the wizard if you start the DVR for the first time (or click “Skip”
to cancel the wizard next time).
Click “Wizard Setup” to start wizard.
The setting steps are as follows.
Choose the language and locality as needed if it is the first time for you to use the wizard.
Date and Time Configuration. The date and time of the system needs to be set up if you
use the wizard for the first time. Refer to the following figure. Set the time zone, system time,
date format and time format. The DST will be enabled by default if the time zone selected
includes DST. Click “Next” to continue.
Wizard & Main Interface
DVR User Manual
11
3 Wizard & Main Interface
3.1 Startup Wizard
The disk icons will be shown on the top of the startup interface. You can view the number and
status of each disk quickly and conveniently through these icons ( : no disk; : unavailable
disk; : RW available disk).
You can quickly configure the DVR by using the wizard setup to make the DVR work
normally. You must configure the wizard if you start the DVR for the first time (or click “Skip”
to cancel the wizard next time).
Click “Wizard Setup” to start wizard
. The setting steps are as follows.
Choose the language and locality as needed if it is the first time for you to use the wizard.
Date and Time Configuration. The date and time of the system needs to be set up if you
use the wizard for the first time. Refer to the following figure. Set the time zone, system time,
date format and time format. The DST will be enabled by default if the time zone selected
includes DST. Click “Next” to continue.