Quick Start Guide

8. UPnP
You can use the UPnP function to enable a fast connection of the device to
WAN via a router without port mapping.
1
click “Apply” button to save.
2 Enable the UPnP function in the router.
3 Click “Refresh” button to refresh the UPnP status. If the UPnP status is still
“Invalid UPnP” after refreshing it several times, the port would be wrong.
Please change the mapping type to “Manual” and then click to modify
the port until the UPnP status turns to “valid UPnP”.
7. Network Configuration & Adding IP Cameras
1
gateway, etc. If using DHCP, please enable DHCP in both the DVR and the router.
2
6036).
3 Click “Apply” to save the settings.
4
IPC which supports Onvif protocol may be added manually. If the IPC searched is not in the same local network as
the DVR, you should select the device and click to modify the IP address.
5 Highlight the device you want to add and then click “Add” button. The DVR will automatically refresh the cameras
and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see
the live image. You may select the added device and click to modify channel, IP address, ect.
Port
TCP/IPv4
DDNS
E-mail
NAT
IP Address Settings
Obtain an I P addre ss a utomati cally
Ether n et P o r t 1 ( O n l ine )
Obatin DN S server addr ess autom aticall y
IP Addre ss
Preferr ed DNS
192 . 168 . 1 . 2
0 . 0 . 0 . 0
192 . 168 . 1 . 1
192 . 168 . 1 . 1
0 . 0 . 0 . 0
Subnet Ma sk
Alterna te DNS
Gateway
UPnP Network Status
4.0. 0.1.beta1
Versi on
80
No.
IP Address
EditPort
Protocol Mode l
Subn et Mask
1
192.168.2.45
XXXXXX
255.255.255.0
Qu i ckly A d d
M an ually A d d
Ad d Cam era
Sele cted: 1/1
Add
Defa uetct Pass word
Rem ai n Ban d w id t h : 10 / 10 M b
Canc el
Mac Addre ss
IP Address
Edit IP
192 .168 . 1 . 45
255 . 255 . 255 . 0
admin
192 .168 . 1 . 1
Subn et Mask
Userna me
Gatewa y
Passwo rd
OK Cancel
CE :98 :23 : 75 :35 :22
Disp lay Password
Came ra Name
IP Address
Model
Edit Camera
XXX
192 .168 . 1 . 58
80
admi n
XXX
Port
Username
Protoc ol
Passwo rd
IP Camera 1
OKTest Cancel
DeleteEdit
No. Camera Name
IP Address
Port
Protocol Model
Preview
Status
Edit Camera
Edit Camera GroupSignal Access Set
Search Camera
1
2
3
4
5
192.168.1 .4 5IP Camera 1
[A01]Came ra 1
[A02]Came ra 2
[A03]Came ra 3
[A04]Came ra 4
XXX
Online
XXX
80
1
PPPoE and then input the user name and password received from your ISP.
2
address, server port, username and password of the IP camera. The IP camera must be connected over WAN.
And here the IP address of the IP camera must be a WAN IP address.
HTTP Port
Server Port
80
6036
80183.17.254.19 Valid UPnP
Valid UPnP
Invalid UPnP
6036183.17.254.19
Port Type
External Port
External Address
UPnP Status Edit
Port
RTSP Port
554
554
TCP/ IPv4
Port UPnP
DDNS
E-mail NAT Network Status
AutoMap Type
UPnP
Enable
Refresh Apply