Manual

Transcendent Series: VMS for Mac OS X
10
Note: Checking or not checking it will affect the stream choice of live preview.
 Change Basic Configuration
Click “Change Basic Configuration” to pop up a dialog box. You can change the basic configuration of device
and check “Permission Check” or “Record Coverage” according to the actual situation.
 Change Time Configuration
Click “Change Time Configuration” to enter the interface. Change the time and date if needed.
Check “Sync by NTP Server” to synchronize with NTP server.
 View Device Log
Click “View Device Log” to enter the interface.
Choose the type of system logs; enter start time and enter time to search the log information of the device.
 View Disk Information
Click “View Disk Information” to check the detail information of disk listed.
 Change Network Configuration
Click “Change Network Configuration” to enter the interface. You can change HTTP port, Server port; network
address, etc.
Note: Changing the port and IP address, the network will disconnect. You will need to change the port and IP
address of the device connecting the Transcendent Mac VMS.
 Alarm Input Trigger and Schedule Configuration
Click “Alarm Input Trigger and Schedule Configuration” to
enter the interface. Select a sensor corresponding to the alarm
input; choose a type and holding time for it. You also can set
trigger alarm or other configurations. Please refer to the picture
on the right.
 Device Alarm Output Configuration
Click “Alarm Output Configuration” to enter the interface.
Select an alarm output and holding time; then edit a name for it.
You can enable buzzer alarm and set a time for it.
 Abnormal Alarm Configuration
Click “Abnormal Alarm Configuration” to enter the interface.
Choose the alarm type. Enable “Buzzer Alarm” and select alarm out.
 User Information Management
Click “User Information Management” shortcut to enter the interface. You can check the information of user