Manualshelf

User manual

ManualsBrandsVitek ManualsOtherVT-IPSD102H -
41424344454647484950
VT-IPSD102H Manual
-40-
The following table lists the possible actions for events.
Action
Description
Beep
Outputs beep sound using the buzzer in the
system
Alarm1/Alarm2
Triggers alarm (relay) port
E-mail
Sends E-mail to the specified address. AVI file
can be attached
FTP
Upload AVI file to a specified FTP server
Preset
Moves the PTZ to associated preset position
Sensor1 / Sensor2
Configure the actions when the sensor 1 or 2 is activated. Multiple actions can be set for a
single event.
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a single
event.
On Motion
Configure the actions when motion is detected. Multiple actions can be set for a single event.
On Disconnect
Configure the actions when the link (connection) with peer system is disconnected. Multiple
actions can be set for a single event.
Alarm and Beep activation duration
Set the duration of alarm or beep activation in case of an event. If it is set to continuous, it will
be in active state until an operator resets it manually.