System information

33!
EVENT / SENSOR : ALARM OUTPUT!
Determines the behavior and actions that will trigger each of the 8/16 alarm outputs.!
Behavior settings!
ALARM OUT : Choose which alarm output to configure. channel)!
OPERATION : The selected alarm output can be enabled or disabled.!
MODE : Can be either TRANSPARENT (the output is active only when the trigger criteria is present) or"
LATCHED (the output is active for a set period of time after a trigger).!
DURATION : In LATCHED mode, the time that the alarm output remains active after it has been trigge
red.!
TYPE : Can be set to high (0V to +5V when activated) or low (+5V to 0V when activated).!
HDD EVENT : Determines whether a hard drive event triggers the alarm output.!
Action settings!
ALARM : Determines whether alarm inputs will trigger the alarm output.!
VIDEO LOSS : Determines whether video loss on any of the selected channels will trigger the alarm ou
tput.!
MOTION : Determines whether motion detection on any of the selected channels will trigger the alarm
output.!
Remember to select APPLY and press ENTER to save all settings before exiting these menus!
Click the ALARM OUTPUT menu
and click the each value. !