User`s manual
1.
Power switch does not function.
o Connect the AC power cord securely.
o Make sure that POWER key is RED (illuminated).
o If the POWER key is RED, input the Password using the [A1]-[D4] buttons
and press the POWER key again.
o If the problem persists, please contact the professional installer or the
security manager.
2. The Clock is showing incorrect time.
o Refer to the Menu-System Configuration section of the User’s Guide and enter
the correct time.
o If the problem persists this indicates that the mercury battery is low.
To replace the battery, contact the professional installer or the security manager.
o If the problem still persists after replacing the mercury battery, please contact
After Service Center located in the back of the User’s Guide.
3. Local Sensor Name Remains Highlighted on the Main Screen.
o When an “event” occurs, the Local Senor remains highlighted until
inactivated by the user. The user must select the highlighted
Sensor and inactivate it.
4.
The screen is not clear.
o The displayed images and the images that were compressed and restored
are programmed to be of the same quality. If you are not satisfied with the
display,
please refer to the Setting Video Color section of the Configuration
chapter of the User’s Guide and manipulate the display.
o If you still feel that there is a significant difference, please recalibrate the
camera’s picture quality or replace the camera.
5
. The remote control does not work.
o The remote keyboard is battery operated. If the keyboard does not operate
properly, please replace the batteries.
o Please be certain that IR transmitter of the keyboard and IR receiver of the
DVR are in alignment.
o
The remote keyboard must be within 15 feet from the DVR.
TROUBLE SHOOTING
6. Cannot record/restore
o Please re-examine the camera’s operation using Recording section of the
User’s Guide as a reference.
o Restoration of images is only possible when images are recorded. Hence,
restoration will not occur if there are no images recorded.
o If recording is programmed as “On Event Recording,” there will be no
recording if there were no “events.”
14