User`s manual

There are two methods of configuring the VT-DVR04: from the site where VT-DVR04 Is
installed and through the Network Connection.
Following are the description for configuring the VT-DVR04 at the site. For Remote
Access Configuration, please refer to the
REMOTE software User’s Guide.
1. Remote Control
The remote control uses infrared (IR) and can be used up
to 16 feet away (at angles not
exceeding 60 degrees) from the VT-DVR04. IR transmitter is located at the center of
the remote control and should face the VT-DVR04.
2. VISS SET-FIND
The VISS SET-FIND Button on the remote control allows the user to bookmark a given
incident during playback and automatically return to that incident
3. Keypad
Another
prominent feature of the VT-DVR04 is the keypad located on the front panel.
Unlike it’s PC based competitors, this allows for complete operation of the VT-DVR04
without using
a computer keyboard.
Using the R
emote Control
9