Specifications

CHRONO Series DVR
45
2. Using the remote software
2-1. Starting the Software
Double click on „REM‟ icon on PC to run the software.
Main screen of the remote software appears as shown below.
Live: Click the image to enter the live mode
Playback: Click the image to enter the playback mode
Display Mode: Select display modes (single screen, 4, 9, 16, 25, 36, 49, 64 and full screen)
Save to Image: Save the recorded data in Image file format
Save to AVI: Save the recorded data in AVI file format
Save to Backup: Backup the recorded data
Connect / Disconnect: Click button for site setup and connect
Setup: Click button for remote software setup
Playback Control: Use buttons to control playback images (Stop, Move by Image, Play, Rewind/Forward, and Move to First/End)
Change Display Page: Change Display Mode to Previous or Next page in camera order.
Audio Volume: Click Audio icon to select audio volume and mute options.
Select a camera to receive Audio of the selected camera (highlighted in orange lines).
Voice Transmission: Click button to transmit remote voice to the local DVR.
Storage Selection: Choose a HDD to playback if the connected DVR has Archive HDD or Read Only HDD in playback mode.
Close: Click the image to close the software
The location of icons and buttons may vary
depending on the product model or software versions.
Connect
Disconnect
Setup
Playback Control
Change Display Page
Display Mode
Save to Image
Save to AVI
Save to Backup
Playback
Live
Close
Audio Volume
Voice Transmission
Storage Selection