Specifications

CHRONO Series DVR

Overwrite: Select Overwrite to overwrite recorded HDD data when it is full

Audio Record: Select Audio Record to record audio with video image

Resolution: Select recording resolution. The setting can be done with groups of 4 cameras (1-4, 5-8, 9-12 and 13-16)

Auto Deletion (days): Turn on Auto Deletion to automatically delete any data older than the defined days

Time Record: Set ips/quality for continuous recording

Event Record: Set ips/quality for event recording

Emergency Record: Set ips/quality for emergency recording mode

In Event, pre and post recording options for Event can be set.

Pre-Event Duration: Video Images that occurred right before an Event can be recorded by

setting Pre-Event under Event Mode. The duration of Pre-Event recording can be set using

Pre-Event (sec) up to 30 seconds.

Emergency Record Duration: Time duration can be set for Emergency recording from 5

seconds to 30 minutes or continuously by selecting No Limit option.

Event REC Duration: Set recording duration for events up to 30 minutes.

In Schedule, fully detailed and specified recording schedules can be set by day, time, modes, cameras and recording options.

Press to add a new schedule. To remove an existing schedule, press . Press Setting to set recording options.

Use Default Setting: Check Use Default Setting to follow main recording setting under Record menu.

2-4-3. MENU > RECORD > Record Tools

In Record Tools, estimated HDD usage and recording period can be calculated. Press Calculate once resolution, IPS, number of cameras and

quality are set. The recording period is calculated based on the size of the HDD installed.

The GB size shows what HDD size is required for a day of recording. Day and Hours shows the period that can be recorded based on the

installed HDD size.

Note

: The calculation results show approximate data only. Same frame rate and video quality does not guarantee same storage size and