Instruction manual

VITEK VT-DVR Series
80
7. Press the Menu button twice to exit to the main window. Then press the Info
button to display system information. The host name should be displayed as
Q.DVRHO, and the IP will display 000.000.000.000 as no IP address has
been issued yet.
8. Wait approximately five minutes, then the DVR Host Name should change to
the DVR’s unique host name. At the same time, the IP address should
display the newly issued IP address from the ISP (Internal IP address shown
below).
4. E-MAIL
The DVR sends notifications to one designated
e-mail address when the following events
occur:
z Alarm Detection
z Video Signal Loss
z Power Failure
z Hard Disk Drive Failure