Instruction manual

VITEK VT-DVR Series
79
3. CONFIGURING THE DVR WITH A CABLE MODEM
The DVR works in conjunction with widely available cable modems that offer
conventional dynamic IP addresses. The following steps are not mandatory, but they
are highly recommended to properly set up the DVR directly with the Cable modems.
1. The DVR and the modem should be powered off.
2. Connect the network cable from the DVR to the modem.
3. Power on the modem.
4. Power on the DVR.
5. Enter the menu and go into the Network Setup Submenu
6. Select Dynamic: Cable