Instruction manual

VITEK VT-DVR Series

a. MOTION GRID

Up to 16 grids may be selected to configure the areas of motion detection. Press

the numeric buttons to select or deselect the desired grid. The motion sensitivity

can also be adjusted while selecting the desired grid and to verify its trigger

efficiency. Use the left or right directional buttons to adjust the sensitivity level. All

grids are on by default

b. MOTION LEVEL

Use the left or the right directional buttons to

adjust the motion sensitivity level. Sensitivity

level 1 is the lowest setting and level 15 is the

highest setting. The default sensitivity level is

c. ALARM INPUT

Select different types of alarm circuit type.

The DVR accepts both normally open circuit

signals and normally closed circuit signals.

Use the left or right directional buttons to

select the appropriate circuit type. The

default is off.