Instruction manual

VITEK VT-DVR Series
42
3. PAN / TILT / ZOOM CONTROL
The DVR comes with an extensive list of PTZ cameras. Please read the PTZ
manufacturer’s instruction manual and understand its settings fully prior to proceeding
to any attempts to connect and control the PTZ camera through the DVR. Please refer
to PTZ Channel and PTZ Model Select under Display Setup on page 51 and 52.
After entering the Pan/Tilt/Zoom screen by pressing the P/T/Z/Focus button, the pages
in the PTZ control menu can only be accessed using the fast forward and fast rewind
button on the remote controller. Please have the remote controller handy when using
the PTZ camera.
1. PAN AND TILT CONTROL
Use the directional buttons to pan and tilt the PTZ
camera. The directional buttons will remain as
the basic pan and tilt controller for all pages.
On the remote controller, use the diagonal
directional buttons to move the camera diagonally.
2. FOCUS CONTROL
Use the jog dial on the DVR or the step buttons
on the remote controller to focus near or focus far.
The time search button enables auto focus and
the cancel/OSD off button disables auto focus.