Instruction manual

VITEK VT-DVR Series
37
onto the fast forward or fast reverse speed. Then release the shuttle ring. The fast
playback will continue automatically. When the desired location is reached, press the
play or the still button to resume playing back at the normal speed or to pause the
playback. Then press the shuttle hold button once again to remove the shuttle hold icon.
3. AUDIO PLAYBACK
The audio data is always recorded in real time unlike the video data that can be
recorded in various modes including real time. There may be a slight delay in
synchronization of the audio to video. During the playback, press the audio-PB button
to synchronize the audio to video as closely as possible.
The audio cannot be played back in the multi
screen view. The single channel view must be
selected to play back the audio data. When any
camera is selected, the audio playback icon will
appear as the audio is being played. When the
audio-PB button is pressed, the icon will blink as
it attempts to synchronize to video.